Muntik na ma zero!tnx sa e2120 blinking done!!!

[wapakelz]

share ko lang mga bossing .......akala ko talaga mazero na naman ako KAHAPON......buti na lng may napadaan BAGO KAMI MAKAPAGSARA......tanggap ko po samsung E2120 blinking

1st action

pen shell then select phone model
2nd : erase eep ito po logs

-------------------------------------------------------------------------
Selected model: E2120
Selected com port: COM17
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Erase - ok
Elapsed time: 115 second, sw ver: 3.5.0027
--------------------------------------------------------------------------


3rd is flash firmware ito po logs

-----------------------------------------------------
Selected model: E2120
Selected com port: COM17
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Start TFS format... OK
Start NOR flash
NOR flash - ok
Start Flash TFS
Download - ok
Elapsed time: 673 second, sw ver: 3.5.0027
---------------------------------------------------------------

ayn po yung ilang simple ways procedures na madalas na ginagawa natin sa mga ganyang problem ng phone.

but wait!ito pa dag dag reference para sa bagitong tulad ko.

after complete flashing dapat read info ulit para sure'ito po logs

------------------------------------------------
Selected model: E2120
Selected com port: COM17
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Phone IMEI -> 00000000000000
Phone SW ->
Langpack-> Not found langpack !
Phone HW ->
Phone BT ADDR ->
Phone WI-FI ADDR ->
[NET LOCK]:
[SIM LOCK]:
[PHONE LOCK]:
[SP LOCK]:
Read Info - ok
Elapsed time: 26 second, sw ver: 3.5.0027
-----------------------------------------------

kung mapapansin nyo po eh zero,zero po ang imei ng unit after flash
kaya next step po jan is copy po yung imei dun sa 1st readinfo then paste dun sa imei box upper part ng shell or check mo yung likod ng unit and type po yung imei sa box then click custom repair. ito po logs

---------------------------------------------------
Selected model: E2120
Selected com port: COM17
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Repair IMEI block
Repair IMEI block
Repair - ok
Elapsed time: 49 second, sw ver: 3.5.0027
-----------------------------------------------

ayan fully done na po......