Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

my phone rio craze invalid imei help

salde

salde

Registered
Joined
Feb 19, 2015
Messages
229
Reaction score
1
Points
1
mgaboss mayron akong na tangGAp na my phone rio craze walang imei

nag hanap ako ng so2ndan ko para sa katulad ng ina ayos ko

marami nMn nakong nakita at sinodan ko ..dinaan niya sa kingo root

tapos nakita ko,, finesh ,tapos ginawa niya sa volcano ok na olit sacces ,,

ito ang ginayako dahil mayron din na kung,, kingo root at box na volcano ,,

nong iprogram ko ayaw ma ditect ,

sa to2olang ,mijo may alam ako sa hardware pio sa sofeware mijo kunti palang



kay boss ,, solver,, tech ang sinodan ko ,,, mga boss pg, micro usb cable ba ang ginamit mo


kailanga mo bang pindotin yung vulome dawn + power ,,,


at kailangan mo rin bang mag intall ng driver para sa unet na ipprogram mo
 
Last edited by a moderator:
mga boss kailangan ko paba mag insall ng driver para sa my phonre rio craze ..ayaw idetect mga boss sa volcano ko

mga boss kailangan ba naka patay cp oh naka on help
 
Last edited by a moderator:
check mo sa device maneger if nanghihingi ng driver ganito gawin mo

open Volcano

click andriod

check rebuild imei

choose method 1

type imei

click run

saksak usb kahit hnd kana mghold ng vol.
 
Hervie said:
check mo sa device maneger if nanghihingi ng driver ganito gawin mo

open Volcano

click andriod

check rebuild imei

choose method 1

type imei

click run

saksak usb kahit hnd kana mghold ng vol.
Click to expand...

oonga nahe2ngi ng driver anong next tep boss mt65xx relodead ang loma labas
 
stigmatized said:
since naka root naman na po ang unit mo boss try mo po sa mtk droid tools

dapat po naka on ang unit at naka enable ang usb debug. mas madali po mag rebuild ng imei dun para sa akin kesa sa vulcano box :)

sana po maka tulong
Click to expand...

oo boss sacces nMn sya sa kinggo root boss labang pictures hehe
 
idol...pls check and make sure na ok ang baseband nyan unit....

masisira ulo natin kakarebuild dyn kung unknown yan...at hindi papasok..

at kung ok naman po ang baseband...rebuild mo via mtkdroids or vulcano po..make sure properly rooted ang unit

mas maganda sa mtkdroids...sa vulcano kasi minsan may bug pag rerebuild..imei 1 at imei 2 magiging same kahit

magkaiba nilagay....all the luck po sana maayos:D
 
-Dial *#*#84666364#*#*



- Go to CONNECTIVITY,CDS INFORMATION then RADIO INFORMATION

Phone 1 : is Imei 1 Or Sim 1
Phone 2 : is Imei 2 Or Sim 2



- Tap PHONE 1 then type

AT +EGMR=1,7,"IMEI_NUM_HERE"

Note: Kasama po yong "

Example:

AT +EGMR789012=1,7,"123456345"



- Tap PHONE 2 then type

AT +EGMR=1,10,"IMEI_NUM_HERE"

Note: Kasama po yong "

Example:

AT +EGMR=1,10,"123456789012345"

kailangan my space sa AT(space)+EGMR=1,10,''imei number ng cp''

gayahin mo ung dapat my kuwit sa imei number ung ganito '' gayahin mo lang ung type ko tested yan kahapon ganyan din issue ko pero done ko dna kaialgnan i root pa .. thanks
 
AT(SPACE)+EGMR=1,7,â€￾IMEI NUMBERâ€￾ for phone 1 > thin press SEND AT COMMAND tab(back)
AT(space)+EGMR=1,10,â€￾IMEI NUMBERâ€￾ for phone 2 > thin press SEND AT COMMAND tab

after na ma press nyo ang SEND AT COMMAND lalabas ito[AT command is mSent] then reboot mo ung phone mo

sana makatulong po.
 
JakeJake said:
-Dial *#*#84666364#*#*



- Go to CONNECTIVITY,CDS INFORMATION then RADIO INFORMATION

Phone 1 : is Imei 1 Or Sim 1
Phone 2 : is Imei 2 Or Sim 2



- Tap PHONE 1 then type

AT +EGMR=1,7,"IMEI_NUM_HERE"

Note: Kasama po yong "

Example:

AT +EGMR789012=1,7,"123456345"



- Tap PHONE 2 then type

AT +EGMR=1,10,"IMEI_NUM_HERE"

Note: Kasama po yong "

Example:

AT +EGMR=1,10,"123456789012345"

kailangan my space sa AT(space)+EGMR=1,10,''imei number ng cp''

gayahin mo ung dapat my kuwit sa imei number ung ganito '' gayahin mo lang ung type ko tested yan kahapon ganyan din issue ko pero done ko dna kaialgnan i root pa .. thanks
Click to expand...

boss kahit walang sim pwd boss pg dial konian ang lumabas.. mobile network not available

Dial *#*#84666364#*#*
 
write mo bro ang imei gamit ka ng volcano box v3.0.0 tested yan ang ginamit ko pang write
 
salde said:
boss kahit walang sim pwd boss pg dial konian ang lumabas.. mobile network not available

Dial *#*#84666364#*#*
Click to expand...


posible naman boss try mo lang ule engineering mode yan ng rio craze e,, kahapon kse yan din problema ko pero na wrewrite ko xa yan ang gamit ko lang ...
 
JakeJake said:
-Dial *#*#84666364#*#*



- Go to CONNECTIVITY,CDS INFORMATION then RADIO INFORMATION

Phone 1 : is Imei 1 Or Sim 1
Phone 2 : is Imei 2 Or Sim 2



- Tap PHONE 1 then type

AT +EGMR=1,7,"IMEI_NUM_HERE"

Note: Kasama po yong "

Example:

AT +EGMR789012=1,7,"123456345"



- Tap PHONE 2 then type

AT +EGMR=1,10,"IMEI_NUM_HERE"

Note: Kasama po yong "

Example:

AT +EGMR=1,10,"123456789012345"

kailangan my space sa AT(space)+EGMR=1,10,''imei number ng cp''

gayahin mo ung dapat my kuwit sa imei number ung ganito '' gayahin mo lang ung type ko tested yan kahapon ganyan din issue ko pero done ko dna kaialgnan i root pa .. thanks
Click to expand...

boss saan ako d2 pa2so ang mga lubas

auto answer
bandmode
cfu
at command tool
modem test
network selecting
networklnfo
gprs
hspa info
mobile data service preferred
fast dormancy
rat mode
rf de-sense test
simme lock

saan ng pi2ndotin ko jan walajan itong ,,Go to CONNECTIVITY,CDS INFORMATION then RADIO INFORMATION
 
salde said:
boss saan ako d2 pa2so ang mga lubas

auto answer
bandmode
cfu
at command tool
modem test
network selecting
networklnfo
gprs
hspa info
mobile data service preferred
fast dormancy
rat mode
rf de-sense test
simme lock

saan ng pi2ndotin ko jan walajan itong ,,Go to CONNECTIVITY,CDS INFORMATION then RADIO INFORMATION
Click to expand...

slide mo pa right boss connectivity un ..makikita mo na cds dun
 
JakeJake said:
slide mo pa right boss connectivity un ..makikita mo na cds dun
Click to expand...

boss sa sim 1 pg tipe lahat isang tipeng lang yon

salamat boss itona nag ta2y ping ako ,, salamat boss sana sacces
 
salde said:
boss sa sim 1 pg tipe lahat isang tipeng lang yon
Click to expand...




AT(SPACE)+EGMR=1,7,â€￾IMEI NUMBERâ€￾ for phone 1 > thin press SEND AT COMMAND tab(back)
AT(space)+EGMR=1,10,â€￾IMEI NUMBERâ€￾ for phone 2 > thin press SEND AT COMMAND tab

after na ma press nyo ang SEND AT COMMAND lalabas ito[AT command is mSent] then reboot mo ung phone mo

sundan mo lang yan. kailangan wala ka makaligtaan jan ,
 
JakeJake said:
AT(SPACE)+EGMR=1,7,â€￾IMEI NUMBERâ€￾ for phone 1 > thin press SEND AT COMMAND tab(back)
AT(space)+EGMR=1,10,â€￾IMEI NUMBERâ€￾ for phone 2 > thin press SEND AT COMMAND tab

after na ma press nyo ang SEND AT COMMAND lalabas ito[AT command is mSent] then reboot mo ung phone mo

sundan mo lang yan. kailangan wala ka makaligtaan jan ,
Click to expand...

boss i2 naba ang huli AT +EGMR=1,10, " tapos send kona sa send at comand
 
salde said:
boss i2 naba ang huli AT +EGMR=1,10, " tapos send kona sa send at comand
Click to expand...


nilgay mo ba imei mo sa cp mo tignan mo sa likod ung imei nya lagay mo dun sa IMEI NUMBER
AT(SPACE)+EGMR=1,7,â€￾IMEI NUMBERâ€￾

example:

AT +EGMR=1,7,â€￾355436788990789â€￾

ganyan gawin mo then s phone 2

AT +EGMR=1,10,â€￾355436788956798â€￾

kailangan lumabas AT command is mSent
sa baba mag pop up yan pag lumabas un ok na yan
reset mo phone mo done na yan
 
mga boss close nato,, solve na dahil sa post ni boss mikzz
 
salamat dito ito na sa wakas mai po2st konarin mga gawako, salamat sa inyo mga boss mga ka ant !!!

salamat olit sayo,, makhulet@ko
 
You must log in or register to reply here.
Who read this thread (Total readers: 0)
No registered users viewing this thread.

Online statistics

Members online
14
Guests online
221
Total visitors
235
Totals may include hidden visitors.

Trending content

Newest members

Stay Connected

Back
Top