Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

My27 Myphone Hang sa LOGO Done

djmelvs_86

Registered
Joined
Nov 21, 2015
Messages
232
Reaction score
1
Points
1
REQUIREMNTS:
- PC
- Micro USB to USB Cable

USB Driver:
- https://mega.nz/#!joVATDzL!8wtoc6EZxyIUmNsdeElZa-FTYFYTwU02-6Smtumm2yg
- No Password
Firmware & RD Downloader:
- https://mega.nz/#!O5cxjDxA!4VLWZ0np1-gv4KQFXF6WrYLf8i15GWRdR8SY0yM7iPo
- No Password
- Magpa Register ka muna sa mega.nz bago kaq mag download ng firmware madali lang namn para iwas aberya

INSTRUCTIONS:
- Download all files needed
- Install Spreadtrum Drivers (Link Below For Spreadtum Driver)
- Extract my27-Unbrick-File.rar
- On the extracted my27-Unbrick-File.rar, right click on the ResearchDownload.exe, select Run as Administrator if u use Win7 OS
- On Research Download, click the Double Gear Icon on the top. (the 2nd Icon)
- Check only FDL1, FDL2, SYSTEM, USERDATA
- Again Check only FDL1, FDL2, SYSTEM and USERDATA, uncheck everything else
- No need tol LOAD PAC File
- Click Play (the triangle icon)
- Turn off your Phone my27
- Press and Hold Vol. Up and Vol. Down.
- Connect it to your PC via USB Cable while still pressing Vol. Up and Vol Down.
- when it starts loading you can let go of the volume keys
- Wait until Research Download finish loading
- when Finish, you can now remove your phone
- Remove Battery and put it back now you can turn on you my27.
- 1st Boot is around 10mins

TESTED by me.... Enjoy... :)
 
salamat dito boss,tested 10000000%(l:0(l:0(l:0
 
t56g6g.jpg
 
p report sa tatsulok ng pass or sa admin or sa staff

salamat
 
Back
Top