What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

My73 dtv frp remove by cm2

djarchie

Registered
Joined
Oct 20, 2014
Messages
120
Reaction score
12
Points
1
Location
tupi south cotabato
BOOTKEY VOL +


69wFWsz.png


Card found: S/N : C81B877E , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Device boot not done
Check Drivers
Try again


Reconnect Power/Cable!


Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 22 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )

Reconnect Power/Cable!


Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 22 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : My73_DTV
Model Brand : MyPhone
Model Device: MyPhone_my73_DTV
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
CompileDate : 1/4/2017 2:02:17 AM
Project Ver : S501_MY73DTV_20161028_V1.08
Model Ext : MyPhone my73 DTV

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:28

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 22 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000005DFF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:29

Reconnect Power/Cable!
 
:
bootkey vol +


69wfwsz.png


card found: S/n : C81b877e , v0136
chinese miracle ii [spd module] v 1.27

set mode to : Sp [sc773x] emmc [android 6.x]

set mode to : Sp [sc773x] emmc [android 6.x]

operation : Check/read info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'volumeup' and 'volumedown' keys
-> alternative : Just one 'volumeup' or 'volumedown' key
3. Insert cable

==== wait for phone...

Device boot not done
check drivers
try again


reconnect power/cable!


Operation : Check/read info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'volumeup' and 'volumedown' keys
-> alternative : Just one 'volumeup' or 'volumedown' key
3. Insert cable

==== wait for phone...

Phone found! [ 22 ]
port opened
sync...
Initial boot failed!
Boot not done, reason : Wrong bootkeys
hint : Reset power and use another bootkey ( vol up or vol down )

reconnect power/cable!


Operation : Check/read info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'volumeup' and 'volumedown' keys
-> alternative : Just one 'volumeup' or 'volumedown' key
3. Insert cable

==== wait for phone...

Phone found! [ 22 ]
port opened
sync...
Initboot done [ 0x81 ] , ver : Sprd3
sync...
Sending fdl
[info] : If sw freeze here more, than 15 seconds - remove cable
fdl ready!
Boot ver : Sc7731 crev emmc loader v2.0
sending flash fdl
flash fdl ready!
Boot ok!

Flash : Emmc flash , structure : Ok!

Reading extended info ...

Model name : My73_dtv
model brand : Myphone
model device: Myphone_my73_dtv
andrversion : 6.0
baseband cpu: Sp7731ceb
compiledate : 1/4/2017 2:02:17 am
project ver : S501_my73dtv_20161028_v1.08
model ext : Myphone my73 dtv

extrainfo : Hwinfo not exists, normal phone

elapsed: 00:00:28

reconnect power/cable!


Operation : Format file system / reset settings [ v1.27 ]
settings : Smartformat is on

1. Remove battery. Insert battery back
2. Press and hold 'volumeup' and 'volumedown' keys
-> alternative : Just one 'volumeup' or 'volumedown' key
3. Insert cable

==== wait for phone...

Phone found! [ 22 ]
port opened
sync...
Initboot done [ 0x81 ] , ver : Sprd3
sync...
Sending fdl
[info] : If sw freeze here more, than 15 seconds - remove cable
fdl ready!
Boot ver : Sc7731 crev emmc loader v2.0
sending flash fdl
flash fdl ready!
Boot ok!

Flashmode set : Ok!
Checking structure ...
Detected emmc flash , structure detect ok!

Emmc phone detected! Will use 'safe format' mode!

Mount : /data
size : 0x000000005dff7000
state : 0x0001

mount : /cache
size : 0x0000000009600000
state : 0x0001

prepare ok! Format ok!
Don't touch phone, until it fully bootup to "welcome screen"!

Android 5.x/6.x : Reset frp lock
reset ok!


Done!

Elapsed: 00:00:29

reconnect power/cable!



salamat sa procedure...:D:D:D
 
Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000005DFF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:27

Reconnect Power/Cable!

Tested
 
Back
Top