WELCOME!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

my73 dtv no power done

Online statistics

Members online
13
Guests online
185
Total visitors
198

bird635

Registered
Joined
Nov 24, 2014
Messages
378
flash po gamit ang cm2
yan po logs
Start at : [8/11/2017 / 2:18:20 PM]
Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SP7731CEB_MyPhone_my73_DTV_6.0_S501_MY73DTV_20161028_V1.08_MyPhone_my73_DTV.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_MYPHONE_MY73_DTV_6.0_INFINITY-BOX
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731C_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
File : logo_480x854.bin
File : fblogo_480x854.bin
File : boot.img
File : system.img
File : sysinfo.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 59 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !

PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : NVM Update
Current ID : NV_W
Current Part : wfixnv1
[FlashProc] : Ok!

[FlashProc] : NVM Update
Current ID : NV_WCN
Current Part : wcnfixnv1
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : sc7731C_CP0_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_Gx.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_480x854.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : fblogo_480x854.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : SYSINFO
Current File : sysinfo.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:05:32

Reconnect Power/Cable!

Finish at : [8/11/2017 / 2:24:10 PM]
GF7gukz.jpg


ito po firmware na gamit ko.. salamat sa iyo
http://www.mediafire.com/file/bg5u3dx1dzt3cuz/MYPHONE+MY73+DTV+BACK-UP+BY+RAFGEN12.rar
 
bat sakin di ng tutuloy ...

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !

PMTManager : Load 0x19 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!

Elapsed: 00:00:06

Reconnect Power/Cable!
 
bat sakin di ng tutuloy ...

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !

PMTManager : Load 0x19 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!

Elapsed: 00:00:06

Reconnect Power/Cable!

EMPTY battery! charge mo muna
 
keep posting boss
next tym boss ung pass wag nyo po e post o e pakita my tatsulok po tayo para jn report mu lng
 
Back
Top