Malditouno
Registered
unit: MYPHONE AGUA HAIL
Problem: Hang On LOGO
Action Taken: FLASHING usingAGUA HAIL FIRMWARE
Tools: SP_Flash_Tool_5.1343.01here
Procedure
pen SP_Flash_Tool_5.1343.01 load your scatter file then click download make sure settings set to Format all + Download
wait until flashing is Done
like this
But after flashing IMEI is INVALID
So you have to rebuild your IMEI you can use any method that you want,,,
For me i useKINGO ROOT for rooting
DONE ROOTING...
after rooting i use MTKdroidTools for IMEI REBUILD
open mtkdroidtools make sure usb debugging is enable.. click ROOT and then there should be promt in your device something about SUPERUSER just click GRANT and your done.
now Click IMEI/NVRAM to put your imei
put your imei at the back in your DEVICE see image below
after putting your IMEI click REPLACE and then REBOOT,,,
AND YOUR DONE.....
<<<<YAN NA PO MAY IMEI NA >>>>
NOTE : may PW po ang FW kaya triangle button mo lang if need the PW..
Problem: Hang On LOGO
Action Taken: FLASHING usingAGUA HAIL FIRMWARE
Tools: SP_Flash_Tool_5.1343.01here
Procedure
pen SP_Flash_Tool_5.1343.01 load your scatter file then click download make sure settings set to Format all + Download
wait until flashing is Done
like this
But after flashing IMEI is INVALID
So you have to rebuild your IMEI you can use any method that you want,,,
For me i useKINGO ROOT for rooting
DONE ROOTING...
after rooting i use MTKdroidTools for IMEI REBUILD
open mtkdroidtools make sure usb debugging is enable.. click ROOT and then there should be promt in your device something about SUPERUSER just click GRANT and your done.
now Click IMEI/NVRAM to put your imei
put your imei at the back in your DEVICE see image below
after putting your IMEI click REPLACE and then REBOOT,,,
AND YOUR DONE.....
<<<<YAN NA PO MAY IMEI NA >>>>
NOTE : may PW po ang FW kaya triangle button mo lang if need the PW..

