akiko
Registered
share kulang mga boss backup firmware
MyPhone Agua Iceberg
scatter sa NckDongle AndroidMTK
ito na.. CPU : MT6589
FIRMWARE : AKIKO
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6583 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6589
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (117Gb+8192Mb) HYNIX 0x484147326504
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A484147326504 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3abe00000 [14.686 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM18)
Build ID: JOP40D
Display ID: ALPS.JB2.MP.V1.2
Version: 4.2.1
Model: MyPhone Agua Iceberg
Brand: MyPhone
Device: MyPhone_Agua_Iceberg
Manufacturer: MyPhone
Region: PH
Mediatek Version Release: ALPS.JB2.MP.V1.2
IMEI[1]: 862255020120926
IMEI[2]: 862255020276926
Dumping Preloader.
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: __NODL_PMT
Partition: __NODL_PRO_INFO
Partition: __NODL_NVRAM
Partition: __NODL_PROTECT_F
Partition: __NODL_PROTECT_S
Partition: __NODL_SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: __NODL_MISC
Partition: LOGO
Partition: EBR2
Partition: __NODL_EXPDB
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: __NODL_FAT
Partition: __NODL_BMTPOOL
Start dumping flash, this can take up to 1 hour.......
[0]Start processing pmt
Reading: BEGIN: 0x700000 - LEN: 0x1000
Start processing proinfo
Reading: BEGIN: 0xb00000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 862255020120926
IMEI[2] from NVRAM: 862255020276926
Start processing PROTECT_F
Reading: BEGIN: 0x1300000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x4780000 - LEN: 0x32000000
Saved to : C:\Users\akiko\Documents\Android_MTK\firmware_backup\MT6589_EMMC_JOP40D__4_2_1_MyPhone Agua Iceberg_MyPhone_2019_10_16_10_16)
Wait untill phone will start charging.
[0]All done.
ALL IS DONE,,
MyPhone Agua Iceberg
scatter sa NckDongle AndroidMTK
ito na.. CPU : MT6589
FIRMWARE : AKIKO
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6583 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6589
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (117Gb+8192Mb) HYNIX 0x484147326504
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A484147326504 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3abe00000 [14.686 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM18)
Build ID: JOP40D
Display ID: ALPS.JB2.MP.V1.2
Version: 4.2.1
Model: MyPhone Agua Iceberg
Brand: MyPhone
Device: MyPhone_Agua_Iceberg
Manufacturer: MyPhone
Region: PH
Mediatek Version Release: ALPS.JB2.MP.V1.2
IMEI[1]: 862255020120926
IMEI[2]: 862255020276926
Dumping Preloader.
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: __NODL_PMT
Partition: __NODL_PRO_INFO
Partition: __NODL_NVRAM
Partition: __NODL_PROTECT_F
Partition: __NODL_PROTECT_S
Partition: __NODL_SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: __NODL_MISC
Partition: LOGO
Partition: EBR2
Partition: __NODL_EXPDB
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: __NODL_FAT
Partition: __NODL_BMTPOOL
Start dumping flash, this can take up to 1 hour.......
[0]Start processing pmt
Reading: BEGIN: 0x700000 - LEN: 0x1000
Start processing proinfo
Reading: BEGIN: 0xb00000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 862255020120926
IMEI[2] from NVRAM: 862255020276926
Start processing PROTECT_F
Reading: BEGIN: 0x1300000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x4780000 - LEN: 0x32000000
Saved to : C:\Users\akiko\Documents\Android_MTK\firmware_backup\MT6589_EMMC_JOP40D__4_2_1_MyPhone Agua Iceberg_MyPhone_2019_10_16_10_16)
Wait untill phone will start charging.
[0]All done.
ALL IS DONE,,
