- Joined
- Apr 14, 2018
- Messages
- 13
- Reaction score
- 1
- Points
- 1
Dala ng tumer hang logo daw. na hr na raw nya (wow marunong na si kuya)
so first and foremost : DL Latest Spft 5.16 and oldest Spft 3.13
DL Firmware Credits to Master @marin for this tested FW
Agua Rio Fun v1 tested_marin - Download - 4shared
DL Drivers if needed
Make sure to know the unit's Chip ID to prevent deados and to know what scat file to flash
Mine is MT6572
Steps:
1.a . Open Latest SPFT and Load FW
1.b . On your keyboard press "ctrl-alt-v" for advance mode
1.c .Go to Format Tab and Follow These Settings
1.d Format mo bahalag ma deado
*if success proceed to step 2
?why dapat e format muna? kasi pag di na format di mo ma flash muli dahil lalabas ang maraming error like BOOTLOADER_SIZE_EXCCEDS? , CANTFLASHNAND or etc...
2.a .Open Old SPFT
2.b .Load firmware
2.c .Hit Download (if naformat na dapat smooth ang flashing nyan
)
2.d .Turn On ang Unit (pag di po nag on yung unit ; check battery)
2.f .Success Flashing
pero?!
invalid imei
proceed to step 3
3.a .Open Any Tools/Box you have for Repairing Imei [NCK box yung ginamit ko]
3.b .Go to IMEI Utils Tab
3.c .Put the imei on the bar and check the boxes
3.d .Choose SpMeta Connection
3.e .Saksak Cord and Vol. Down for Detection [ only release when its detected ]
3.d .wait till done
and success!
done sana makatulong
so first and foremost : DL Latest Spft 5.16 and oldest Spft 3.13
DL Firmware Credits to Master @marin for this tested FW
Agua Rio Fun v1 tested_marin - Download - 4shared
DL Drivers if needed
Make sure to know the unit's Chip ID to prevent deados and to know what scat file to flash
Mine is MT6572
Steps:
1.a . Open Latest SPFT and Load FW
1.b . On your keyboard press "ctrl-alt-v" for advance mode
1.c .Go to Format Tab and Follow These Settings
*if success proceed to step 2
?why dapat e format muna? kasi pag di na format di mo ma flash muli dahil lalabas ang maraming error like BOOTLOADER_SIZE_EXCCEDS? , CANTFLASHNAND or etc...
2.a .Open Old SPFT
2.b .Load firmware
2.c .Hit Download (if naformat na dapat smooth ang flashing nyan
2.d .Turn On ang Unit (pag di po nag on yung unit ; check battery)
2.f .Success Flashing
pero?!
invalid imei
proceed to step 3
3.a .Open Any Tools/Box you have for Repairing Imei [NCK box yung ginamit ko]
3.b .Go to IMEI Utils Tab
3.c .Put the imei on the bar and check the boxes
3.d .Choose SpMeta Connection
3.e .Saksak Cord and Vol. Down for Detection [ only release when its detected ]
3.d .wait till done
and success!
done sana makatulong
salamat po