What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Myphone Agua Rio Lite Hang Easy To Solve Using Bin Files

MasterTech

Registered
Joined
Oct 25, 2014
Messages
225
Reaction score
9
Points
1
Problem
hang And Logo

sa isang unit ako nag back up ng bin files

Solution


open volcano box tick android >usb mode>chek write flash>load bin then start w8 until process is complete


may imei na po yan mag rebuild na lang para di magkaparehas...


install mobileuncle tools


Procedure:

1- Go to Engineer mode in mobile Uncle tool.

2- Select Engineer mode[MTK]

3- Go to CDS information

4- Select Radio Information

5- Select the phone 2 (if you want to change sim2's imei number) Here you can see a command line with “AT+........â€￾.
Now just add this command to it AT+EGMR=1,10,â€￾15 digit YOUR NEW IMEI NOâ€￾ And press “send at commandâ€￾ button. [ if you want to change the the phone 1 IMEI AT+EGMR=1,7,â€￾NEW IMEI NOâ€￾] Yes we all done…

now you can restart the phone and check the IMEI by pressing *#06#


DONE


Bin Files Is The Best Solution No hustle,No Error​
 
thanks MasterTech ,sipag gandang bwenamano :)
 
boss pwede pa share ng bin file mo nito...need ko kasi wala akong ibang same unit na makukuhanan...salamat boss!!
 
boss tanggap ako dto ayw mdetect ng pc ko kht anu gwn ko
 
boss, congrats...pwede pa share ng files mo??badly needed lng po....tnx
 
boossss pwd po pa share ng bin files n ginamit mo pm nyo n lang po ako kailangan lng po asap..
 
rio lite

problem
hang and logo

sa isang unit ako nag back up ng bin files

solution


open volcano box tick android >usb mode>chek write flash>load bin then start w8 until process is complete


may imei na po yan mag rebuild na lang para di magkaparehas...


install mobileuncle tools


procedure:

1- go to engineer mode in mobile uncle tool.

2- select engineer mode[mtk]

3- go to cds information

4- select radio information

5- select the phone 2 (if you want to change sim2's imei number) here you can see a command line with “at+........â€￾.
Now just add this command to it at+egmr=1,10,â€￾15 digit your new imei noâ€￾ and press “send at commandâ€￾ button. [ if you want to change the the phone 1 imei at+egmr=1,7,â€￾new imei noâ€￾] yes we all done…

now you can restart the phone and check the imei by pressing *#06#


done


bin files is the best solution no hustle,no error​



bago ka post kumpletuhin mo! Ganyan din post mo sa kabilang forum!
:((:((:((:((:((:((:((:((:((:((:((:((:((:((
 
boss pahinge nang bin file meron ako tanggap ngayun dead po cya maraming salamat
 
Back
Top