What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

MyPhone Agua Rio V2 Need help

jaytech

jaytech

Registered
Joined
Jun 5, 2017
Messages
133
Reaction score
5
Points
1
Goodpm mga boss pa help namn po need ko exact and tested firmware nito mga boss Godbless po :)





ANTGSM TAGUIG CHAPTER PO :)
 
Myphone Agua Rio S5501 V1 / V2 (Kitkat) ito subukan mo
 
rodpogi said:
hindi po agua rio fun V2...agua rio v2 lng po hanap ni sir..
Click to expand...
sorry iba magkaiba nga pala fun sa rio lng tignan ko kung meron akong file :D:D:D
burahin ko na yun
 
Last edited by a moderator:
Salamat po sa mga feedback mga boss pero base po sa pag backup ko before flash MT6582 sya medyo nakakalito lang talaga ito tatlo pla ang cpu nito mt6571, mt6582

ito po ss error
 
may password po ba ito paki tatsulok nalang po o pm nyo nalang po ako para maireport ko po.. salamat po
 
Ano po kaya exact problem nito mga boss ?
CM2 ErrCode : 0x3EC0 While Flashing

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393051D7862FA56153
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393051D7862FA56153
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x1C5CD27735D6CBDF25F5999152E4DB5E
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : s5501 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3541 mV
BL : [WARNING] : BatteryLevel LOW!!!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x000000007D200000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request!
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:09

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Error! Something went wrong!
ErrCode : 0x3EC0

Operation Failed
Elapsed: 00:03:22
Reconnect Power/Cable!
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top