REFERENCE Myphone myxl1 Frp Done w/backup By Cm2 Dongle

[jhundragon]

Model: myxl1

Problem: FRP

Connect Cm2 dongle
Click cm2sp2
Check nyo muna custom settings number 1
Click identity device number 2
Dapat po naka off ang unit
Hold volume down
insert usb
yon nadetect

Proceed na po tayo sa pagtanggal ng frp
Click Service
Select Reset Frp
Click Format FS
Dapat po naka off ang unit
Hold volume down
insert usb
Done

ito na po

ito naman po ang ss pagbackup halos 30 minutes

Firmware
http://www.mediafire.com/file/wd1lnnxlkzs7qom/myxl1_by_jhundragon.rar/file
Sana po makatulongpakifeedback nalang po sa mga nakasubok para mapakinabangan ng iba
backup po muna bago magflash
maraming maraming salamat po​

 

[Apskie78]

Good Job.... Master,

 

[jhundragon]

Good Job.... Master,

Salamat po boss

 

[rsg_27]

thanks d2 sir

 

[de_cath05]

Paano sir mag write firmware wla nman pwede paglagyan ng files

 

[jhundragon]

Paano sir mag write firmware wla nman pwede paglagyan ng files
[/QUOT
sa cm2 dongle po yan cm2sp2 gamitin mo

 

[de_cath05]

DOUBLE CLICK LANG PLA PRA PUMASOK UNG FIRMWARE.....
error flashing sakin boss humihinto sa TRUSTOS..paano ba magflash nito ...

Card found : 7ABA1563 , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.01

Load IDBase v9215 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : OPM2.171019.012
Display ID : M5578_MYXI1_20190227_V1.12
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-02-05
Build Time : 1551252480
Product Model : myXI1
Product Brand : MyPhone
Product Name : myXI1
Product Device : myXI1
Product Manfct : MyPhone
Product Info : myXI1
Product Board : MyPhone
Board Platform : sp7731e


Operation : Flash Firmware [ v2.01 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!

FSIMG : prodnv.img
CODE : recovery.img
ERASE : MISC
CODE : tos.bin
Failed to update block!
ERROR : 0000008E:00000000FF7F0000


Error : Flashing failed!
Check previous message for more info!

 

[jhundragon]

DOUBLE CLICK LANG PLA PRA PUMASOK UNG FIRMWARE.....
error flashing sakin boss humihinto sa TRUSTOS..paano ba magflash nito ...

Card found : 7ABA1563 , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.01

Load IDBase v9215 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : OPM2.171019.012
Display ID : M5578_MYXI1_20190227_V1.12
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-02-05
Build Time : 1551252480
Product Model : myXI1
Product Brand : MyPhone
Product Name : myXI1
Product Device : myXI1
Product Manfct : MyPhone
Product Info : myXI1
Product Board : MyPhone
Board Platform : sp7731e


Operation : Flash Firmware [ v2.01 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!

FSIMG : prodnv.img
CODE : recovery.img
ERASE : MISC
CODE : tos.bin
Failed to update block!
ERROR : 0000008E:00000000FF7F0000


Error : Flashing failed!
Check previous message for more info!

Ano po boss problema ng unit?kung logo hang po karamihan nadadala naman sa hard reset wait mo lang 7 to 10 mins lalabas nyan frp na.

 

[rashkie01]

Boss pnu pgload ng file dq ma Load s cm2sp2 v2.00 anu version gmit nio?expire n kc dongle ko

 

[jhundragon]

Boss pnu pgload ng file dq ma Load s cm2sp2 v2.00 anu version gmit nio?expire n kc dongle ko
[/QUOTE

Boss pnu pgload ng file dq ma Load s cm2sp2 v2.00 anu version gmit nio?expire n kc dongle ko

kailangan po kasi activated sya v.2.05 na sya ngayon

 

[JOVANE25]

KAHIT NA 2.05 YAN ERROR PAREN YAN MERON DIN PO AKO GANYAN LATEST MODULE NAPO AKO ERROR PARIN AWA NG DIOS NAG TOLOY SA Firmware ne sir chad kaso patay history logo only

 

[jolan070611]

kailangan ng FDL file sir,, not supported din sa akin..

 

[jonardnex]

may update naba nito? sa fdl?