Myphone Qtv38 FDM mismatch done...[Reference]

[AltF4]

mga katinapay i share ko lang po ang aking nagawa...
unang thread ko po ito dito kaya pasensya kung hindi masyado detalyado

problem:
Pag on lumalabas lang FDM mismatch.
action taken:
1. read flash sa volcano para may back up.
2. write flash using backup ni volcano. no luck.
3. format sa volcano. no luck (namamatay ang computer)
4. sinaksak ko si dragon then format. (tapang na ko kay may back up).
5. Done. Hingin ang 250 petot ng costumer

Eto po ang logs pag format:

>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:5,
Signal Pin:1, 2, 3,
>>> Scanning Mobile PinOut...
>>> Please Hold the Power key...
Get Mobile PinOut: TXD:3 RXD:2
>>> Please Hold the Power key...
>>> Connecting Mobile...
CPU_ID:MT6253
Hardware Version:8A04
Software Version:8A00
>>> Downloading First Boot...
>>> Downloading Second Boot...
>>> Authenticating BOOT...
BOOT Validation Success...
================NOR Flash Info=================
Flash Size:0x01000000 -> 16M
Flash ID:0x0001007E00630001
Flash Name:NOR_S29VS128R_T
================NAND Flash Info=================
Flash Size:0x00000000 -> 0M
Flash ID:0x0000000000000000
Flash Name:UNKNOWNUNKNOWN
>>> Switching Baud Rate...
Baud Rate is Switched To:921600
Formatting Start Adress(Hex): 0x00E00000 Size(Hex): 0x00200000
>>> Formatting...
All Done...

 

[aloy25]

salamat sa pag share mo boss malaking tulong to sa akin na bago lang sa dito sa tahanan natin..