myphone rio 2 lite hang logo

[microtech249]

good day mga bosing share lang,......
unit MYPHONE RIO 2 LITE HANG LOGO solved by tested firmware...

link here; https://drive.google.com/uc?export=download&confirm=L5aU&id=0B93fqCUuxz97STFVdGllNDlOaHc

pass; androidcribs

hit thanks sana makatulong

 

[xown]

hang parin boss

 

[broxrell1717]

hang parin boss

try mo boss stock rom
https://drive.google.com/file/d/0B7WShDXKZLgzNzFPeDNGaW4yMUU/view

 

[makolet]

sir baka pede pa backup neto ng bin file salamt hehe

 

[PHONE CARE]

mga bossing pa password naman nito thanks

 

[peacemaker71]

hang parin boss

DI PA KASI COMPLITO ANG PROCEDURE NI T.S. AFTER HUNG UP TRY THIS PROCEDURE SIR

1. Click Scatter-loading and browse for the scatter file (MT6582_Android_scatter)
2. For Bootloop only
Make sure flashing mode is set to “Download Onlyâ€￾ and check mark all except Preloader.
Note: If deadboot/hardbrick set “Download+Formatâ€￾ and check Preloader.
3. Click Download.


4. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
5. Green Circle image with check will show once flashing is completed. That’s it!

6. Disconnect your phone in USB cord then on your phone! If still bootloop Go to recovery mode
Reboot and press vol up and power On button. Then perform Wipe cache and data or Factory reset!
Note: . After Flashing the ROM, you will be stucked up in MyPhone logo. So follow the steps below.
A. Turn Off the Phone
B. Hold Power + Volume Down
C. Go to Signaling Test, and press Menu button.
D. Wait for a while and you will see selections, choose TEST PASS and REBOOT.

Credits:
Benjie Loria
MyPhone RIO 2 Lite | Micromax Unite 3 | Wiko Bloom 2 UNITEDâ„¢ Group
http://androidcribs.com