Try ko first CM2 ayaw error now try ko sa crack na NCK pasok...
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6571_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 208 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM9)
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x300000
[2]Part: NVRAM Begin: 0x400000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x700000 Len: 0x300000
[4]Part: SECCFG Begin: 0xa00000 Len: 0x40000
[5]Part: UBOOT Begin: 0xa40000 Len: 0x80000
[6]Part: BOOTIMG Begin: 0xac0000 Len: 0x600000
[7]Part: RECOVERY Begin: 0x10c0000 Len: 0x600000
[8]Part: SEC_RO Begin: 0x16c0000 Len: 0x40000
[9]Part: MISC Begin: 0x1700000 Len: 0xc0000
[10]Part: LOGO Begin: 0x17c0000 Len: 0x100000
[11]Part: EXPDB Begin: 0x18c0000 Len: 0x200000
[12]Part: ANDROID Begin: 0x1ac0000 Len: 0x14000000
[13]Part: CACHE Begin: 0x15ac0000 Len: 0x180000
[14]Part: USRDATA Begin: 0x15c40000 Len: 0x9540000
[15]Part: BMTPOOL Begin: 0xffff0038 Len: 0x0
Offset: 0x1f158000 Count: 16
Dumping data, wait.
Value found, procesing[010c][001c0000]
Resetting phone.
FORMAT NAND FLASH : BEGIN: 0x15c40000 - LEN: 0x9540000
Format Range: 0X15C40000 ~ 0X1F17FFFF
Format Size: 1.17Gb
Bad Blocks: 0
Error Blocks: 2
Total Blocks: 597
Bad/Error Block Ratio: (0.335%)
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
All done.
Panis pa ang dongle cm2 ko sa freesoft lang pla katapat... haha
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6571_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 208 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM9)
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x300000
[2]Part: NVRAM Begin: 0x400000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x700000 Len: 0x300000
[4]Part: SECCFG Begin: 0xa00000 Len: 0x40000
[5]Part: UBOOT Begin: 0xa40000 Len: 0x80000
[6]Part: BOOTIMG Begin: 0xac0000 Len: 0x600000
[7]Part: RECOVERY Begin: 0x10c0000 Len: 0x600000
[8]Part: SEC_RO Begin: 0x16c0000 Len: 0x40000
[9]Part: MISC Begin: 0x1700000 Len: 0xc0000
[10]Part: LOGO Begin: 0x17c0000 Len: 0x100000
[11]Part: EXPDB Begin: 0x18c0000 Len: 0x200000
[12]Part: ANDROID Begin: 0x1ac0000 Len: 0x14000000
[13]Part: CACHE Begin: 0x15ac0000 Len: 0x180000
[14]Part: USRDATA Begin: 0x15c40000 Len: 0x9540000
[15]Part: BMTPOOL Begin: 0xffff0038 Len: 0x0
Offset: 0x1f158000 Count: 16
Dumping data, wait.
Value found, procesing[010c][001c0000]
Resetting phone.
FORMAT NAND FLASH : BEGIN: 0x15c40000 - LEN: 0x9540000
Format Range: 0X15C40000 ~ 0X1F17FFFF
Format Size: 1.17Gb
Bad Blocks: 0
Error Blocks: 2
Total Blocks: 597
Bad/Error Block Ratio: (0.335%)
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
All done.
Panis pa ang dongle cm2 ko sa freesoft lang pla katapat... haha
