phone lock ayaw naman pahinangi ni ate walang option kung gumawa ng modify cable
ng dolpin clip
ok done salamt sayang din kasi kahit mababa hahahahah
logs
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.11, (Nov 10 2012 00:51:46, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0007B7F
HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk01
Initializing security card...
Card Serial Number: D00B0550
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.89v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 99
Avaiable Physical Memory: 1.1023GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Sending User Abort Signal...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Recovery Mode Failed, storing Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm827__03.04.mcusw (XGold2)...
Checking rm827__03.04.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.49_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm827__03.04.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41BBFFFF...
Flashing at 0x40280000...
Flashed 25952256 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing rm827__03.04.ppm_m4 (XGold2)...
Checking rm827__03.04.ppm_m4...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m4.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41BC0000-0x421BFFFF...
Flashing at 0x41BC0000...
Flashed 3672472 bytes OK
Processing rm827__03.04.image_m4_059N407 (XGold2)...
Checking rm827__03.04.image_m4_059N407...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m4_059N407.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x421C0000-0x43E1FFFF...
Flashing at 0x421C0000...
Flashed 14548992 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Generic Phone]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C2-00 USB Phonet]: Port opened OK!
MCU Version V 03.04
MCU Date 20-04-12
Product RM-827 (Nokia RM-827)
Manufacturer (c) Nokia
IMEI 353257054843585
Mastercode 717467022
IMEI Spare 3A35520745485308
IMEI SV 3335520745485308F2000000
PPM V 03.04, 20-04-12, RM-827, (c) Nokia , M4
CNT Content: m4_059N407, V 03.04, 20-04-12, RM-827, (c) Nokia
PSN 9D5A3DFAH
Product Code 059N295
Module Code 0205081
Basic Product Code 059K3X3
PSD 0000000000000000
LPSN 0
HW 1100
RFIC 68
LCD TPO
BT 19b5-22012
Asic 11
HW Signature 5571A15E0C837217
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000004000B
Simlock Aux 000B0000
Simlock IMEI 00003532570548435800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
inabot ng isang oras bago nakagawa ng cable hahahahah salamat
ng dolpin clip
ok done salamt sayang din kasi kahit mababa hahahahah
logs
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.11, (Nov 10 2012 00:51:46, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0007B7F
HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk01
Initializing security card...
Card Serial Number: D00B0550
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.89v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 99
Avaiable Physical Memory: 1.1023GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Sending User Abort Signal...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Recovery Mode Failed, storing Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm827__03.04.mcusw (XGold2)...
Checking rm827__03.04.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.49_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm827__03.04.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41BBFFFF...
Flashing at 0x40280000...
Flashed 25952256 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing rm827__03.04.ppm_m4 (XGold2)...
Checking rm827__03.04.ppm_m4...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m4.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41BC0000-0x421BFFFF...
Flashing at 0x41BC0000...
Flashed 3672472 bytes OK
Processing rm827__03.04.image_m4_059N407 (XGold2)...
Checking rm827__03.04.image_m4_059N407...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m4_059N407.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x421C0000-0x43E1FFFF...
Flashing at 0x421C0000...
Flashed 14548992 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Generic Phone]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C2-00 USB Phonet]: Port opened OK!
MCU Version V 03.04
MCU Date 20-04-12
Product RM-827 (Nokia RM-827)
Manufacturer (c) Nokia
IMEI 353257054843585
Mastercode 717467022
IMEI Spare 3A35520745485308
IMEI SV 3335520745485308F2000000
PPM V 03.04, 20-04-12, RM-827, (c) Nokia , M4
CNT Content: m4_059N407, V 03.04, 20-04-12, RM-827, (c) Nokia
PSN 9D5A3DFAH
Product Code 059N295
Module Code 0205081
Basic Product Code 059K3X3
PSD 0000000000000000
LPSN 0
HW 1100
RFIC 68
LCD TPO
BT 19b5-22012
Asic 11
HW Signature 5571A15E0C837217
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000004000B
Simlock Aux 000B0000
Simlock IMEI 00003532570548435800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
inabot ng isang oras bago nakagawa ng cable hahahahah salamat