PinoyTechnician
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Need Firmware GX Pad 300D hang sa logo
- Thread starter sakuragi
- Start date
Unit Done
Hang in Logo
Procedure;
Open Pad Firmware Upgrade
load Firware
insert usb cable in tablet
wait till software detected the device
then thick upgrade button
Screenshoots:
done upgrade
Kala ko tapos na problem ko meron pa palang sira "AUTO CHARGING" kala pala hirap iopen unit
ito po ginawa ko for auto charging" only remove 5 legs ic seen in the picture"
finish product
FIRMWARE: http://pan.baidu.com/s/17XHh1
NOTE: Working po lahat sa kin, maliban sa camera nya,di po ako sure kasi baka may tama din ang cam nito,try nyo na lang, at sabihin na rin sa TUMER yong possibility
sana makatulong
Hang in Logo
Procedure;
Open Pad Firmware Upgrade
load Firware
insert usb cable in tablet
wait till software detected the device
then thick upgrade button
Screenshoots:
done upgrade
Kala ko tapos na problem ko meron pa palang sira "AUTO CHARGING" kala pala hirap iopen unit
ito po ginawa ko for auto charging" only remove 5 legs ic seen in the picture"
finish product
FIRMWARE: http://pan.baidu.com/s/17XHh1
NOTE: Working po lahat sa kin, maliban sa camera nya,di po ako sure kasi baka may tama din ang cam nito,try nyo na lang, at sabihin na rin sa TUMER yong possibility
sana makatulong