What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Nid help po Samsung n7100 Hang on logo

xspeices09

Expired Account
Joined
Mar 6, 2015
Messages
1,548
Reaction score
275
Points
381
Location
Balasan,iloilo
pagka flash ko po nag stop hanggan 40% lang hinugot ko ung usb tpus binalik try ko ulit flash
e2 na ung lumalabas ngayun
Flash files count is :12
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
----------------------------------------------------
EMMC: (28Gb+0Kb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM10)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Error: S_DA_DRAM_NOT_SUPPORT
Wait untill phone will start charging.
All done.
 
Na try ko na meg sa Low version kag High version same man japun meg Error: S_DA_DRAM_NOT_SUPPORT
 
Back
Top