jamshut
Expired Account
download this firmware: http://www.freeflashfile.com/nokia/BB5/Asha 310.RM-911/8.13/
flash by cyclone box:
salpak usb tapos push power buton 2times
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:34:19, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Key Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: A0000BE9
HW Revision: E, Suitable for: Production, Case: Orange Key Casing, MCU Manufacture Time: Green PCB Rev. 4 2012 wk33, MCU 2011 wk09
Box is activated
Started box selftests procedure
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 1.35GB
Avaiable Virtual Memory: 1.811GB
Avaiable Pagefile: 3.478GB
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
APE Subsystem Not Found
NPC Backup stored in "29155A403B3210BE49922109B26AA9BC8582D300_7272016_23751 PM.NPC.CMT.crt"
[Nokia USB Phonet]: Port opened OK!
Recovery Mode Failed, storing Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restoring from Recovery Mode...
Restored from Recovery Mode OK
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm911__07.37.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
rm911__07.37.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x400A0000-0x4261FFFF, NOR
EraseArea[0,CMT]: 0x42620000-0x4271FFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 17.285s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.784s
Flashing Speed: 35419.84 kBit/S
Processing rm911__07.37.mcusw (APE)...
Processing rm911__07.37.ppm_maa (CMT)...
rm911__07.37.ppm_maa, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x42720000-0x42FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 4.306s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.248s
Flashing Speed: 38490.39 kBit/S
Processing rm911__07.37.ppm_maa (APE)...
Processing E3C28D62_rm911__07.37.image_maa_059R0X1 (CMT)...
E3C28D62_rm911__07.37.image_maa_059R0X1, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x43000000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 29.859s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 9.344s
Flashing Speed: 39727.19 kBit/S
Processing E3C28D62_rm911__07.37.image_maa_059R0X1 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Factory defaults OK
Reading info...
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Booting CMT...
Sending User Abort Signal...
BB5 USB Boot Rom not Detected -> User Abort
Failed to Boot CMT -> No compatible USB devices detected
Prepare phone failed with message -> Failed to Boot CMT
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm911__08.13.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
rm911__08.13.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x400A0000-0x4261FFFF, NOR
EraseArea[0,CMT]: 0x42620000-0x4271FFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 17.4s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.301s
Flashing Speed: 34880.15 kBit/S
Processing rm911__08.13.mcusw (APE)...
Processing rm911__08.13.ppm_maa (CMT)...
rm911__08.13.ppm_maa, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x42720000-0x42FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.291s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.404s
Flashing Speed: 37973.19 kBit/S
Processing rm911__08.13.ppm_maa (APE)...
Processing rm911__08.13.image_maa_059R0W0 (CMT)...
rm911__08.13.image_maa_059R0W0, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x43000000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 22.246s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 11.108s
Flashing Speed: 39932.05 kBit/S
Processing rm911__08.13.image_maa_059R0W0 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 08.13
MCU Date 16-05-13
Product RM-911 (Nokia RM-911)
Manufacturer (c) Nokia
IMEI 354598053964040
Mastercode 224357270
IMEI Spare 3A45950835690404
IMEI SV 3345950835690414F1000000
PPM V 08.13, 16-05-13, RM-911, (c) Nokia , MAA
CNT Content: maa_059R0W0, V 08.13, 16-05-13, RM-911, (c) Nokia
PSN 9354370BI
Product Code 059R0W2
Module Code 0205400
Basic Product Code 059Q6X1
PSD 0000000000000000
LPSN 0
WLAN MAC 4C2578FDCD46
AHNE 12
HW 2600
RFIC Integrated to main ASIC
LCD TPO
BT 0101-0.1.7
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
flash by cyclone box:
salpak usb tapos push power buton 2times
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:34:19, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Key Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: A0000BE9
HW Revision: E, Suitable for: Production, Case: Orange Key Casing, MCU Manufacture Time: Green PCB Rev. 4 2012 wk33, MCU 2011 wk09
Box is activated
Started box selftests procedure
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 1.35GB
Avaiable Virtual Memory: 1.811GB
Avaiable Pagefile: 3.478GB
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
APE Subsystem Not Found
NPC Backup stored in "29155A403B3210BE49922109B26AA9BC8582D300_7272016_23751 PM.NPC.CMT.crt"
[Nokia USB Phonet]: Port opened OK!
Recovery Mode Failed, storing Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restoring from Recovery Mode...
Restored from Recovery Mode OK
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm911__07.37.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
rm911__07.37.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x400A0000-0x4261FFFF, NOR
EraseArea[0,CMT]: 0x42620000-0x4271FFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 17.285s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.784s
Flashing Speed: 35419.84 kBit/S
Processing rm911__07.37.mcusw (APE)...
Processing rm911__07.37.ppm_maa (CMT)...
rm911__07.37.ppm_maa, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x42720000-0x42FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 4.306s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.248s
Flashing Speed: 38490.39 kBit/S
Processing rm911__07.37.ppm_maa (APE)...
Processing E3C28D62_rm911__07.37.image_maa_059R0X1 (CMT)...
E3C28D62_rm911__07.37.image_maa_059R0X1, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x43000000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 29.859s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 9.344s
Flashing Speed: 39727.19 kBit/S
Processing E3C28D62_rm911__07.37.image_maa_059R0X1 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Factory defaults OK
Reading info...
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Booting CMT...
Sending User Abort Signal...
BB5 USB Boot Rom not Detected -> User Abort
Failed to Boot CMT -> No compatible USB devices detected
Prepare phone failed with message -> Failed to Boot CMT
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm911__08.13.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 29155A403B3210BE49922109B26AA9BC8582D300
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
rm911__08.13.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x400A0000-0x4261FFFF, NOR
EraseArea[0,CMT]: 0x42620000-0x4271FFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 17.4s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.301s
Flashing Speed: 34880.15 kBit/S
Processing rm911__08.13.mcusw (APE)...
Processing rm911__08.13.ppm_maa (CMT)...
rm911__08.13.ppm_maa, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x42720000-0x42FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.291s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.404s
Flashing Speed: 37973.19 kBit/S
Processing rm911__08.13.ppm_maa (APE)...
Processing rm911__08.13.image_maa_059R0W0 (CMT)...
rm911__08.13.image_maa_059R0W0, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x43000000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 22.246s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 11.108s
Flashing Speed: 39932.05 kBit/S
Processing rm911__08.13.image_maa_059R0W0 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 08.13
MCU Date 16-05-13
Product RM-911 (Nokia RM-911)
Manufacturer (c) Nokia
IMEI 354598053964040
Mastercode 224357270
IMEI Spare 3A45950835690404
IMEI SV 3345950835690414F1000000
PPM V 08.13, 16-05-13, RM-911, (c) Nokia , MAA
CNT Content: maa_059R0W0, V 08.13, 16-05-13, RM-911, (c) Nokia
PSN 9354370BI
Product Code 059R0W2
Module Code 0205400
Basic Product Code 059Q6X1
PSD 0000000000000000
LPSN 0
WLAN MAC 4C2578FDCD46
AHNE 12
HW 2600
RFIC Integrated to main ASIC
LCD TPO
BT 0101-0.1.7
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
