sewren
Registered
nokia 310 sec code done via flashing
open cyclone
input- mcu,ppm,image then flash
wait till done.
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C00081E9
HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk09
Initializing security card...
Card Serial Number: D0xxxxx
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.99v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.00v PASSED
VBAT Voltage 5.05v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 97
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 3.1023GB
Avaiable Virtual Memory: 1.801GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
Prepare phone failed with message -> XG223 Algo not Ready
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Boot skipped on user request
Restarting MCU...
[Nokia USB Flashing Generic]: Port opened OK!
Setting factory defaults of: Factory set full
[Nokia USB Phonet]: Port opened OK!
Factory set failed -> Server not accepted issued factory set command
Setting factory defaults of: Factory set full
[Nokia USB Phonet]: Port opened OK!
Factory set failed -> Server not accepted issued factory set command
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing EE0CFD4F_rm911__08.13_2.mcusw (CMT)...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
EE0CFD4F_rm911__08.13_2.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
Processing Flash Image Failed -> Failed to send XG223 2nd Boot Length
Failed to Process all Image files -> Failed to process EE0CFD4F_rm911__08.13_2.mcusw
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing EE0CFD4F_rm911__08.13_2.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
EE0CFD4F_rm911__08.13_2.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x400A0000-0x4261FFFF, NOR
EraseArea[0,CMT]: 0x42620000-0x4271FFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 15.8s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.285s
Flashing Speed: 34956.75 kBit/S
Processing EE0CFD4F_rm911__08.13_2.mcusw (APE)...
Processing 4A2C8D4E_rm911__08.13.ppm_mac (CMT)...
4A2C8D4E_rm911__08.13.ppm_mac, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x42720000-0x42FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.479s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.841s
Flashing Speed: 37633.47 kBit/S
Processing 4A2C8D4E_rm911__08.13.ppm_mac (APE)...
Processing B34E2EA8_rm911__08.13.image_mac_059R7B4 (CMT)...
B34E2EA8_rm911__08.13.image_mac_059R7B4, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x43000000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 29.266s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 11.76s
Flashing Speed: 40142.09 kBit/S
Processing B34E2EA8_rm911__08.13.image_mac_059R7B4 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 08.13
MCU Date 16-05-13
Product RM-911 (Nokia RM-911)
Manufacturer (c) Nokia
IMEI 354598055407980
Mastercode 431625263
IMEI Spare 3A45950855049708
IMEI SV 3345950855049718F1000000
PPM V 08.13, 16-05-13, RM-911, (c) Nokia , MAC
CNT Content: mac_059R7B4, V 08.13, 16-05-13, RM-911, (c) Nokia
PSN 966FD15BI
Product Code 059R7B4
Module Code 0205400
Basic Product Code 059R6H2
PSD 0000000000000000
LPSN 0
WLAN MAC 3CC243001FCB
AHNE 12
HW 2600
RFIC Integrated to main ASIC
LCD TPO
BT 0101-0.1.7
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Setting factory defaults of: Factory set full
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults set OK
open cyclone
input- mcu,ppm,image then flash
wait till done.
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C00081E9
HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk09
Initializing security card...
Card Serial Number: D0xxxxx
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.99v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.00v PASSED
VBAT Voltage 5.05v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 97
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 3.1023GB
Avaiable Virtual Memory: 1.801GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
Prepare phone failed with message -> XG223 Algo not Ready
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Boot skipped on user request
Restarting MCU...
[Nokia USB Flashing Generic]: Port opened OK!
Setting factory defaults of: Factory set full
[Nokia USB Phonet]: Port opened OK!
Factory set failed -> Server not accepted issued factory set command
Setting factory defaults of: Factory set full
[Nokia USB Phonet]: Port opened OK!
Factory set failed -> Server not accepted issued factory set command
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing EE0CFD4F_rm911__08.13_2.mcusw (CMT)...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
EE0CFD4F_rm911__08.13_2.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
Processing Flash Image Failed -> Failed to send XG223 2nd Boot Length
Failed to Process all Image files -> Failed to process EE0CFD4F_rm911__08.13_2.mcusw
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing EE0CFD4F_rm911__08.13_2.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 15869FCA990B769649B22809A258041886D56200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
EE0CFD4F_rm911__08.13_2.mcusw, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x400A0000-0x4261FFFF, NOR
EraseArea[0,CMT]: 0x42620000-0x4271FFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 15.8s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.285s
Flashing Speed: 34956.75 kBit/S
Processing EE0CFD4F_rm911__08.13_2.mcusw (APE)...
Processing 4A2C8D4E_rm911__08.13.ppm_mac (CMT)...
4A2C8D4E_rm911__08.13.ppm_mac, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x42720000-0x42FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.479s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.841s
Flashing Speed: 37633.47 kBit/S
Processing 4A2C8D4E_rm911__08.13.ppm_mac (APE)...
Processing B34E2EA8_rm911__08.13.image_mac_059R7B4 (CMT)...
B34E2EA8_rm911__08.13.image_mac_059R7B4, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 2ECFC8C8BB6F1E5571C6D30DAA717E19E9E5C31A
Started group flash erase
EraseArea[0,CMT]: 0x43000000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 29.266s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 11.76s
Flashing Speed: 40142.09 kBit/S
Processing B34E2EA8_rm911__08.13.image_mac_059R7B4 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 08.13
MCU Date 16-05-13
Product RM-911 (Nokia RM-911)
Manufacturer (c) Nokia
IMEI 354598055407980
Mastercode 431625263
IMEI Spare 3A45950855049708
IMEI SV 3345950855049718F1000000
PPM V 08.13, 16-05-13, RM-911, (c) Nokia , MAC
CNT Content: mac_059R7B4, V 08.13, 16-05-13, RM-911, (c) Nokia
PSN 966FD15BI
Product Code 059R7B4
Module Code 0205400
Basic Product Code 059R6H2
PSD 0000000000000000
LPSN 0
WLAN MAC 3CC243001FCB
AHNE 12
HW 2600
RFIC Integrated to main ASIC
LCD TPO
BT 0101-0.1.7
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Setting factory defaults of: Factory set full
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults set OK