j_car09
Registered
nokia 5000d-2 hang done by cyclone full flash[Reference]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.82, (Nov 12 2011 09:45:38, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C00021FF
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk27
Initializing security card...
Card Serial Number: D40001FD
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.12v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 5.10v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 5.04v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Credits Left: 100
Avaiable Physical Memory: 1.143GB
Avaiable Virtual Memory: 1.493GB
Avaiable Pagefile: 3.107GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
Sending User Abort Signal...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
CBUS Request Error -> User abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 500Kbits
Flashbus Read baud set to 4Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
Terminating flash session
Boot operation took 6.265s
Check Flashing Bus finished
MCU Version V 06.31
MCU Date 24-03-09
Product RM-362 (Nokia 5000/5000D-2 CABLE 2630)
Manufacturer (c) Nokia
IMEI 355701022402279
Mastercode 2651302413
IMEI Spare 3A55070122042207
IMEI SV 3355070122042237F1000000
PPM V 06.31, 24-03-09, RM-362, (c) Nokia , EL
CNT Content: el_pur, V 06.31, 24-03-09, RM-362, (c) Nokia ,
PSN IOG902281
Product Code 0573576
Module Code 0203260
Basic Product Code 0553713
PSD 0000000D00000000
LPSN 0
HW 2003
UEM 1328
UPP 3162
RFIC 0500
DSP ICPR72_09w08_UPP
LCD SEIKO
BT 2222-143C
Asic 11
HW Signature 73A9BDE96D2EF6C8
Simlock Server SIMLOCK SERVER
Simlock Key 5150300000000000
Simlock Profile 800000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553557010224022700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 51503F
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 110 products, Filtering DCT4 Products - wait...
Failed to Substitue INI Variant Data -> Access violation at address 0061E796 in module 'Cyclone.exe'. Read of address 00000000
6 Products left after filtering. Ready.
Retrieving Variants for Product RM-362 - wait...
382 Variants Retrieved
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__05.45.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84236A339FD345E7FB930FBFBF
MSID-Plain: 2C40BAE9009761ECAA000000
FAID-Crypted: 892698BA988AF3A69E61F435
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01BFFFFF]
Erase taken 106.969s
Writing 191 blocks...
All blocks written OK! Time taken 74.688s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__05.45_ISM_004.image_opv_smart_black, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84D4BA2DFED162AB521A3B0322
MSID-Plain: D26EBAF1009761ECAA000610
FAID-Crypted: 9FF864D6869CB48B4A0BE4DB
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02180000-0x02E7FFFF]
Erasing NOR Region [0x02E80000-0x02FBFFFF]
Erase taken 127.312s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 488 blocks...
All blocks written OK! Time taken 51.531s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__05.45.ppm_t, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 847B5F410502B8A39AFAD985F3
MSID-Plain: 3E4EBAE9009761ECAA000000
FAID-Crypted: FC27FA9BC750D6C850D835E4
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C00000-0x0217FFFF]
Erase taken 49.750s
Writing 80 blocks...
All blocks written OK! Time taken 31.266s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
Click here to view the original image of 769x577px.
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.82, (Nov 12 2011 09:45:38, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C00021FF
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk27
Initializing security card...
Card Serial Number: D40001FD
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.12v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 5.10v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 5.04v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Credits Left: 100
Avaiable Physical Memory: 1.143GB
Avaiable Virtual Memory: 1.493GB
Avaiable Pagefile: 3.107GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
Sending User Abort Signal...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
CBUS Request Error -> User abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 500Kbits
Flashbus Read baud set to 4Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
Terminating flash session
Boot operation took 6.265s
Check Flashing Bus finished
MCU Version V 06.31
MCU Date 24-03-09
Product RM-362 (Nokia 5000/5000D-2 CABLE 2630)
Manufacturer (c) Nokia
IMEI 355701022402279
Mastercode 2651302413
IMEI Spare 3A55070122042207
IMEI SV 3355070122042237F1000000
PPM V 06.31, 24-03-09, RM-362, (c) Nokia , EL
CNT Content: el_pur, V 06.31, 24-03-09, RM-362, (c) Nokia ,
PSN IOG902281
Product Code 0573576
Module Code 0203260
Basic Product Code 0553713
PSD 0000000D00000000
LPSN 0
HW 2003
UEM 1328
UPP 3162
RFIC 0500
DSP ICPR72_09w08_UPP
LCD SEIKO
BT 2222-143C
Asic 11
HW Signature 73A9BDE96D2EF6C8
Simlock Server SIMLOCK SERVER
Simlock Key 5150300000000000
Simlock Profile 800000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553557010224022700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 51503F
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 110 products, Filtering DCT4 Products - wait...
Failed to Substitue INI Variant Data -> Access violation at address 0061E796 in module 'Cyclone.exe'. Read of address 00000000
6 Products left after filtering. Ready.
Retrieving Variants for Product RM-362 - wait...
382 Variants Retrieved
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__05.45.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84236A339FD345E7FB930FBFBF
MSID-Plain: 2C40BAE9009761ECAA000000
FAID-Crypted: 892698BA988AF3A69E61F435
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01BFFFFF]
Erase taken 106.969s
Writing 191 blocks...
All blocks written OK! Time taken 74.688s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__05.45_ISM_004.image_opv_smart_black, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84D4BA2DFED162AB521A3B0322
MSID-Plain: D26EBAF1009761ECAA000610
FAID-Crypted: 9FF864D6869CB48B4A0BE4DB
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02180000-0x02E7FFFF]
Erasing NOR Region [0x02E80000-0x02FBFFFF]
Erase taken 127.312s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 488 blocks...
All blocks written OK! Time taken 51.531s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__05.45.ppm_t, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 847B5F410502B8A39AFAD985F3
MSID-Plain: 3E4EBAE9009761ECAA000000
FAID-Crypted: FC27FA9BC750D6C850D835E4
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C00000-0x0217FFFF]
Erase taken 49.750s
Writing 80 blocks...
All blocks written OK! Time taken 31.266s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
Click here to view the original image of 769x577px.