Nokia 515.2 no power

[PhoneDoctor]

Problem : Nokia 515.2 no power

History : Biglang nag Blink tapos ayaw ng mag Power

Solution : Flash kay ATF

Tools : ATF Box
Micro USB Cable
Firmware : Click Me !!!

Procedure : Open ATF GUI
Set Proper Setting
Load Firmware
Click Flash and wait till flashing finish

Screenshots :

Flahing Log :

Number of Image Files: 3

Processing Image File : 
 rm952__10.34_2.mcusw
Processing Image File : 
 rm952__10.34_2.ppm_m4
Processing Image File : 
 rm952__10.34_2.image_m4_059T0X0


AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, and 3...

1. Remove USB Cable and Battery...
2. Connect USB Cable.
3. Connect Battery.

***** IF PHONE STARTS CHARGING OR DOES NOT BOOT *****
******* REMOVE BATTERY AND PUT IT BACK AGAIN. *******
======================================================


Infineon Boot: F01650A9070100030101E0201412002439435A525DB5FFFF
CPU Type: Intel XG618

         <<<< Connect Battery Now >>>>

Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Flash Chip Manufacturer: STMicroelectronics
Flash Boot Successful...
Unique Data: E020141200243943
Original Product Code: 059T0X0
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
 Plain RPL saved to:
 C:\AdvanceBox Turbo Flasher\Nokia\Backup\359952053798947\359952053798947_115608.rpl

Current File    : rm952__10.34_2.mcusw
Number of Images: 8
psi_flash_unsigned.fls
slb_signed.fls
main_toc_signed.fls
rm952__10.34.mcusw_signed_mcusw.fls
swap_signed.fls s
dynsw.fls
aeneas_signed.fls s
fota_signed.fls s
Processing Data Block 0x00
Erase Block: 0x00090000~0x000A0FAE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x01
Erase Block: 0x60000000~0x6003FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x02
Erase Block: 0x60040000~0x600403FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x03
Erase Block: 0x62E00000~0x63D29696
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xFFF00000~0xFFF7FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Processing Data Block 0x04
Erase Block: 0x80000000~0x80C2D06E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x05
Erase Block: 0x62080000~0x620C3FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x06
Erase Block: 0x63F79C00~0x63FC046E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x07
Erase Block: 0x61F00004~0x620498A6
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File    : rm952__10.34_2.ppm_m4
Number of Images: 1
package_m4.ppm_ebl_psi.fls
Processing Data Block 0x00
Erase Block: 0x80F00000~0x815F021E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File    : rm952__10.34_2.image_m4_059T0X0
Number of Images: 1
package_m4_059T0X0.image.fls
Processing Data Block 0x00
Erase Block: 0xA1000000~0xA33979FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xAE000000~0xAE2FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...

Total Flashing Time (Erase + Flashing) : 00:00:29
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)



Scanning USB Ports...

================================================
             Basic Phone Information             
================================================
MCU Version: V 10.34 13-03-14 RM-952 (c) Nokia            
IMEI Plain : 359952053798947
IMEI Spare : A359952053798940
IMEI SV    : 33599520537989425F
IMEI (2nd) : 359952053798954
IMEI Spare : A359952053798950
IMEI SV    : 33599520537989525F
Phone Model: Nokia 515
Category   : Phone
Phone Type : RM-952

================================================
            Extended Phone Information           
================================================
Product Serial Number: 448F6D1BH
Product Code         : 059T0X0
Module Code          : 0205689
Basic Production Code: 059S4T1
Long Production SN   : 0
PPM SW Version       : V 10.34 13-03-14 RM-952 (c) Nokia             M4
BT MCM Version       : 19e2-4702G12
ADSP Version         : PMU_MAXIM8939B
MCU SW Version       : V 10.34 13-03-14 RM-952 (c) Nokia
HW Version           : 1000
UEM Version          : 18
UPP Version          : MFR:0x20,DEV:0x40,REV:0x131
RFIC Version         : 152
LCD Version          : TPO
Camera               : 0103B904005005
Content Pack Version : Content: m4_059T0X0 V 10.34 13-03-14 RM-952 (c) Nokia
AHNE Version         : 13
RETU Version         : PMU_MAXIM8939B
Bluetooth ID         : 2C:5A:05:53:EC:8D
CS Type              : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII

  ********** SIMLOCK INFO  ********** 
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 800000000004000B
ASIC         : 11
PROVIDER     : Default Test Operator
LOCK COUNTERS: KEYPRESS 0/3,  FBUS 0/10

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open

SIMLOCK_TYPE             : PA_SIMLOC30 (20-digit NCK)
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
SECURITY_CODE          : 12345
PHONE_MODE              : TEST
                                                
================================================
          Dynamic Camera Configuration          
================================================
DCC ID  : 0103B904
DCC Ver: 005005
Status   : OK


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK


RESET LIFE TIMER TO : 0000:00
 OK

Done : :d:d:d

for reference lang po...