NOKIA ASHA 200 no power!! DONE BY FREE SOFT. PROCIDURE INSIDE!

[renald_tech]

GOOD DAY AGIN !

share q lang NOKIA ASHA 200
NO POWER PERO MY ILAW KEYPAD..

FIRMWARE : http://search.4shared.com/q/CCAD/1/RM-761?suggested )
PERO ETO PO PINILI KO.. http://www.4shared.com/rar/l8tyP9nH/rm-761.htm

FLASH TOOL: http://www.4shared.com/rar/VON3vFxKba/Nokia_Best_ver_175__1_.html

card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm761__11.95.mcusw
PPM : rm761__11.95.ppm_bg
CNT : rm761__11.95.image_bg_059N5N5
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 358259042112847
IMEI 2 : 358259042112854
PCcode : 059J512

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Documents and Settings\amnah telecom\Desktop\Nokia_Best ver 1.75by gsm-mithun\Backup\Cert\358259042112847_358259042112854_XG213_CRT.rpl


===Flashing [MCU]===
File : rm761__11.95.mcusw
Image : rm761__11.95.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:07
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:03
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:01:57
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:01:36
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip

===Flashing [PPM]===
File : rm761__11.95.ppm_bg
Image : package_bg.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00740000
Erasing, wait ...
Erase done, time : 00:00:20
Write , Start : 0x41A80000 , Len : 0x005FE538
Flashing , wait ...
Region flash done, time : 00:00:20

===Flashing [CNT]===
File : rm761__11.95.image_bg_059N5N5
Image : package_bg_059N5N5.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:02:41
Write , Start : 0x421C0000 , Len : 0x00F60000
Flashing , wait ...
Region flash done, time : 00:00:26
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:06
No write data, skip

Flashing done!
Total flash time : 00:07:45
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 200
Software Info: V 11.95 19-12-12 RM-761 (c) Nokia
IMEI: 358259042112847
PPM version : V 11.95 19-12-12 RM-761 (c) Nokia BG
Product code: 059J512
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 43 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:08:41
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:19

Phone disconected!

Connect phone on selected interface...

DONE ! ! 300 PETOT ..