WELCOME!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

REFERENCE nokia ta 1046 stuck on download mode

Online statistics

Members online
1
Guests online
235
Total visitors
236

Bhetamax

Registered
Joined
Jun 4, 2019
Messages
193
Possible fix: Nokia smartphone stuck on Download mode after OTA update
GGznxTK.jpg

Procedure: Change the active slot to the inactive one
1 Download and install Nokia USB Drivers on your Windows PC.
2 Download Minimal ADB and fastboot to communicate with the device in download (fastboot) mode.
3 Connect the phone to the PC using a USB cable.
4 Open the minimal ADB and fastboot folder and run “cmd-here.exe”. It will open the Windows Command Processor.
5 Check that your phone shows up by typing:
Type to command
1 fastboot devices
2 fastboot reboot
Your device will either start up or come back to download mode. Good
if it starts up, else continue the steps below.
Now check your current boot slot, type
3 fastboot getvar current-slot
4 fastboot --set-active=b
5 fastboot --set-active=a
6 fastboot reboot

c7pAGsw.jpg


done :)
kpag tulala hard reset "Vol+ power"
sna mkatulong
 
Possible fix: Nokia smartphone stuck on Download mode after OTA update
GGznxTK.jpg

Procedure: Change the active slot to the inactive one
1 Download and install Nokia USB Drivers on your Windows PC.
2 Download Minimal ADB and fastboot to communicate with the device in download (fastboot) mode.
3 Connect the phone to the PC using a USB cable.
4 Open the minimal ADB and fastboot folder and run “cmd-here.exe”. It will open the Windows Command Processor.
5 Check that your phone shows up by typing:
Type to command
1 fastboot devices
2 fastboot reboot
Your device will either start up or come back to download mode. Good
if it starts up, else continue the steps below.
Now check your current boot slot, type
3 fastboot getvar current-slot
4 fastboot --set-active=b
5 fastboot --set-active=a
6 fastboot reboot

c7pAGsw.jpg


done :)
kpag tulala hard reset "Vol+ power"
sna mkatulong
salamat tested po
 
Back
Top