Nokia x rm-980 android deadboot done by atf jtag

[jerrenn]

PROBLEM DEADBOOT NAPUTOL DAW UPADATE KAYA NO POWER

ACTION TAKEN

FIRST REPAIR BOOT VIA ATG JTAG
SOLDER PIN OUT MAKIKITA MO PAG SELECT MO NG PHONE
may tiknik sa jtag ito :WAG MUNA ILAGAY ANG USB CABLE THEN CLICK RESTORE BOOT SABAY BALIK NG USB SAPOL YAN KUNG MAY ERROR PAKI DUOBLE CHECK
NG PIN OUT MO BAKA MAY NAGKADIKIT ..

AFTER BOOT REPAIR LOGO LANG YAN

KAYA DOWNLOAD FIRMWARE USING NAVIFIRM

FLASHING NA

[Nokia Android Phone Flashing Started


======================================================
Nokia Android Firmware Flasher
======================================================

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Press and Hold the VOLUME DOWN button
2. Connect it to the USB Port while still Pressing
the VOLUME DOWN button
3. Continue to Press the VOLUME DOWN button for 15
more seconds
======================================================

Establishing Connection...
SW Version : 10.0.3
Phone Model : Nokia_X
Phone Type : RM-980
SW Version : 10.0.3
IMEI #2 Plain : 353046065210326
IMEI #1 Plain : 353046064210525
Product Code : 059T9G0
Serial Number : 2742ba48

================================================
Extended Phone Information
================================================
Baseband Version : 8X25-SSRSKOLYM-3072
Build Description : msm8625-user 4.1.2 JZO54K eng.ZYC.20140213.155540 test-keys
Build Fingerprint : qcom/msm8625/msm8625:4.1.2/JZO54K/eng.ZYC.20140213.155540:user/test-keys
Android OS Version : 4.1.2
Product Platform : Nokia X software platform 1.0

Rebooting to Bootloader...
Waiting for Bootloader...

Processing MODEM
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing BOOT
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing RECOVERY
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing SYSTEM
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing VARIANT
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing USERDATA
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing UDISK
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK
Processing PRELOAD
Initiating File Download...
Start Sending Blocks...
All Blocks Sent: OK
Writing to eMMC...
All Blocks Written: OK

Flashing Done!
Total Flashing Time (Erase + Flashing) : 00:05:44

Rebooting to Normal Mode...
/QUOTE]

finish product