enable usb debuging dapat. para tuloy-tuloy na
procxedure;
First goto recovery by pressing volume up + home + power button at Enable CP Loogging,then follow this proccedure
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.
screen shot.
<table id="ncode_imageresizer_warning_1" class="ncode_imageresizer_warning" width="500"><tbody><tr><td class="td1" width="20">
</td><td class="td2">
</td></tr></tbody></table>
ayan done na....! reference lang mga idol. wala ng photo. walng camera ako dito eh tnx for viewing
procxedure;
First goto recovery by pressing volume up + home + power button at Enable CP Loogging,then follow this proccedure
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.
screen shot.
<table id="ncode_imageresizer_warning_1" class="ncode_imageresizer_warning" width="500"><tbody><tr><td class="td1" width="20">
</td><td class="td2">
</td></tr></tbody></table>
ayan done na....! reference lang mga idol. wala ng photo. walng camera ako dito eh tnx for viewing