pahabol...
note 7.0 sm-n9208 frp and gt-s7392 unlock
logs in octo
Welcome to Octoplus/Octopus Box Samsung software version 2.6.0
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-N9208
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
Reading PIT failed.
Operation was failed!
Performed by 2.6.0 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-N9208
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.0 Software version.
-----------------------------------------------------------------------------------
To connect GT-S7392 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#7284#" number.
8. Set "UART" radio button to "MODEM" value.
9. Set "USB" radio button to "PDA" value.
10. Press "Save and Reset", phone will restart.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Broadcom
Selected port: COM6
Selected model: GT-S7392
Connecting to phone on COM23
Detected phone model: GT-S7392
Firmware compiled date: Sat Jan 25 15:04:31 KST 2014
Phone SN: R21F43R0RXE
Android version: 4.1.2 (JZO54K)
Performed by 2.6.0 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Broadcom
Selected port: COM23
Selected model: GT-S7392
Detected phone model: GT-S7392
SW version:
S7392DXUANA3/S7392OLBANA2/S7392XXUAML1/S7392DXUANA3
HW Version: GT-S7392RWAGLB
Phone IMEI A: 358401-05-604629-3
Phone IMEI B: 358402-05-604629-1
Firmware compiled date: Sat Jan 25 15:04:31 KST 2014
Phone SN: R21F43R0RXE
Android version: 4.1.2 (JZO54K)
Reading phone unlock codes. This can take some time, please wait...
Connecting to server...
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Checking operation...
Operation successfully checked.
Freeze unlock code: 29409168
NCK unlock code: 17520493
NSCK unlock code: 00000000
SPCK unlock code: 00000000
CPCK unlock code: 00000000
MultiCK unlock code: 00000000
Performed by 2.6.0 Software version.
note 5 using micro uart cable and usb cable...
note 7.0 sm-n9208 frp and gt-s7392 unlock
logs in octo
Welcome to Octoplus/Octopus Box Samsung software version 2.6.0
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-N9208
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
Reading PIT failed.
Operation was failed!
Performed by 2.6.0 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-N9208
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.0 Software version.
-----------------------------------------------------------------------------------
To connect GT-S7392 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#7284#" number.
8. Set "UART" radio button to "MODEM" value.
9. Set "USB" radio button to "PDA" value.
10. Press "Save and Reset", phone will restart.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Broadcom
Selected port: COM6
Selected model: GT-S7392
Connecting to phone on COM23
Detected phone model: GT-S7392
Firmware compiled date: Sat Jan 25 15:04:31 KST 2014
Phone SN: R21F43R0RXE
Android version: 4.1.2 (JZO54K)
Performed by 2.6.0 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Broadcom
Selected port: COM23
Selected model: GT-S7392
Detected phone model: GT-S7392
SW version:
S7392DXUANA3/S7392OLBANA2/S7392XXUAML1/S7392DXUANA3
HW Version: GT-S7392RWAGLB
Phone IMEI A: 358401-05-604629-3
Phone IMEI B: 358402-05-604629-1
Firmware compiled date: Sat Jan 25 15:04:31 KST 2014
Phone SN: R21F43R0RXE
Android version: 4.1.2 (JZO54K)
Reading phone unlock codes. This can take some time, please wait...
Connecting to server...
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Checking operation...
Operation successfully checked.
Freeze unlock code: 29409168
NCK unlock code: 17520493
NSCK unlock code: 00000000
SPCK unlock code: 00000000
CPCK unlock code: 00000000
MultiCK unlock code: 00000000
Performed by 2.6.0 Software version.
note 5 using micro uart cable and usb cable...
