O+ 360 ALPHA PLUS 2.0 privacy protection .. Done by: Cm2

[b3t]

[NVM] : Write Ok!

[Info] : NVRAM Repair on erased/damaged phone :
1. Fix Unknown BaseBand
2. Power On phone, check BB state
3. Write NVRAM
4. Repair Security

Done!
Elapsed: 00:00:28
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473464040502A2606EA159
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d4GA
[eMMC] : FLASH_CID : 90014A4841473464040502A2606EA159
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0xC1306CE71FFCF0AB4A5EF560FAEAF7FC
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Oplus
ProdName : O+_360_Alpha_Plus_2.0
ProdModel : O+_360_Alpha_Plus_2.0
Device : O+_360_Alpha_Plus_2.0
AndroidVer: 5.1
MTKxCPU : MT6582
MTKxPRJ : ALPS.L1.MP12.V1_JOYASZ6582.WE.L1_P1

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!


Operation : Reset Privacy Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473464040502A2606EA159
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d4GA
[eMMC] : FLASH_CID : 90014A4841473464040502A2606EA159
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0xC1306CE71FFCF0AB4A5EF560FAEAF7FC
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Checking data ...

Process block #1
Process block #2

Privacy Lock reset Ok!

Done!
Elapsed: 00:00:29
Reconnect Power/Cable!

 

[rHaVeN]

nice share boss....

lagyan nlng sa susunod ng ss....para ayos tlaga

 

[b3t]

sensya na boss. nagmamadali si tomer