What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Oppo a11w vibrate only help!

GOMAGOMA

GOMAGOMA

Expired Account
Joined
Feb 21, 2016
Messages
646
Reaction score
97
Points
281
Location
MAJAYJAY LAGUNA
HELP NAMAN MGA BOSS PARANG LAHAT NA NG FIRMWARE DITO NAGAMIT KO NA PERO VIBRATE PADIN SYA. PAKITINGNAN NAMAN MGA PAPS. SALAMAT :x


rp698TI.jpg
 
ano ba dati status ng phone na yan paps..
up ko lang to.

________________________
br.
JerbyGSM
 
jerbygsm1988 said:
ano ba dati status ng phone na yan paps..
Up ko lang to.

________________________
br.
jerbygsm
Click to expand...


hang logo paps. Una hr muna ganun padin tapos sa sd card update negative din tas flash na ko dami ko nang na flash na firmware wala padin paps.
 
mukhang may tama nga mmc nyan boss pero try mo parin ibang firmware.

hanapin mo yung ganito ang folder ng firmware

A11Wex_11_1510022

tested sa akin malaki lang kasi ang firmware diko ma upload. gooluck boss.
 
eMHAC said:
may tanggap din ako n2 try ko din tong firmware ni boss clive kyalang pag xtrack ko ung bigay ni boss clive error p.m ko sya ngayon ulit waiting mode..
Click to expand...

waiting din ako paps katatapos ko lang mag download [-O{
 
e2 log ng reading sa cm2 sakin..


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111017071C0E43203
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111017071C0E43203
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xE5D22326C96E44682C96D6A6F828B12D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Processing Miscellaneous test
MSC : BatteryLevel : 3712 mV

[Processing] FlashMemory Read-Write test
[eMMC] : [HYNIX] , a2G4 , 0xE9000000 , 3728 MiB
[eMMC] : CID : 90014A483447326111017071C0E43203

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

[Processing] RAM Read-Write test
[DRAM] : 0x40000000 , 1024 MiB

[DRAM] : ADDRESS BUS test
[PASSED] : Bus Count : 0x1D
[DRAM] : DATA BUS test
[PASSED] : Bus Count : 0x1F
[DRAM] : PATTERN test
[FAILED] : Result : 0x00000C1B
[DRAM] : INCDEC test
[PASSED] : INCDEC Ok

All Done!

Done!
Elapsed: 00:01:48
Reconnect Power/Cable!
 
eMHAC said:
e2 log ng reading sa cm2 sakin..


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111017071C0E43203
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111017071C0E43203
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xE5D22326C96E44682C96D6A6F828B12D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Processing Miscellaneous test
MSC : BatteryLevel : 3712 mV

[Processing] FlashMemory Read-Write test
[eMMC] : [HYNIX] , a2G4 , 0xE9000000 , 3728 MiB
[eMMC] : CID : 90014A483447326111017071C0E43203

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

[Processing] RAM Read-Write test
[DRAM] : 0x40000000 , 1024 MiB

[DRAM] : ADDRESS BUS test
[PASSED] : Bus Count : 0x1D
[DRAM] : DATA BUS test
[PASSED] : Bus Count : 0x1F
[DRAM] : PATTERN test
[FAILED] : Result : 0x00000C1B
[DRAM] : INCDEC test
[PASSED] : INCDEC Ok

All Done!

Done!
Elapsed: 00:01:48
Reconnect Power/Cable!
Click to expand...

ano bang lagay na sayo ngayon boss? vibrate din ba?
 
margoloko11 said:
HELP NAMAN MGA BOSS PARANG LAHAT NA NG FIRMWARE DITO NAGAMIT KO NA PERO VIBRATE PADIN SYA. PAKITINGNAN NAMAN MGA PAPS. SALAMAT :x


rp698TI.jpg
Click to expand...

mayron ako back up gling sa cm2 back up wt lang po kc upload kopa

IMG_20170328_082952.jpg
 
Last edited by a moderator:
yan lang idm extension mo sa firefox cguro boss ang problema
 
You must log in or register to reply here.
Back
Top