john_cover
Registered
Oppo A3s CPH1853 Password Removed via free miracle emmc plus tool
for beginners who cannot afford expensive isp gadget.. pwede na to sana makatulong
Tools needed
Miracle thunder dongle (activated)
cheap card reader ( can buy lazada or shopee or aliexpress for just 5dollars I think
regulated power supply preferebly can adjust to a lower voltage 1.8v with very small amount of current
Soldering iron/ soldering lead
cutter nipper for removing the metallic shield of EMMC ( be very carefull)
microscope (binocular or trinonocular) optional kung medyo malinaw pa mga mata..
and must have good soldering technique.
copper wire for isp connection
micro usb
procedure:
-confirm that the mobile is really has a password locked forgotten by the owner
-disassembly the mobile and full out the main circuit board and locate the position of emmc isp connections
-after you proper locate and identify the isp connection.. then solder it with connecting wires.. jumper wire corresponding to the isp pinout
( you can google it... andami pakalat kalat lang... huwag tamad magsearch ehehehe)
-so from main board isp connect those wire to emc card reader
* CLK
* CMD
* DATO
* VCCQ 1.8v
-warning!! remove or do not use battery
-connect the emmc card reader direct on PC with the main board connected to it. and connect micro usb cable on the charging port
-open miracle emmc plus tool and wait to identify or detect it as PHYSICAL DRIVE
-- when detected just hit factory reset and done.
- remove all connection..
-reassemble the unit, turn it on, wait a few minutes for erasing .and dial emergency *#813# for frp
done
for beginners who cannot afford expensive isp gadget.. pwede na to sana makatulong
Tools needed
Miracle thunder dongle (activated)
cheap card reader ( can buy lazada or shopee or aliexpress for just 5dollars I think
regulated power supply preferebly can adjust to a lower voltage 1.8v with very small amount of current
Soldering iron/ soldering lead
cutter nipper for removing the metallic shield of EMMC ( be very carefull)
microscope (binocular or trinonocular) optional kung medyo malinaw pa mga mata..
and must have good soldering technique.
copper wire for isp connection
micro usb
procedure:
-confirm that the mobile is really has a password locked forgotten by the owner
-disassembly the mobile and full out the main circuit board and locate the position of emmc isp connections
-after you proper locate and identify the isp connection.. then solder it with connecting wires.. jumper wire corresponding to the isp pinout
( you can google it... andami pakalat kalat lang... huwag tamad magsearch ehehehe)
-so from main board isp connect those wire to emc card reader
* CLK
* CMD
* DATO
* VCCQ 1.8v
-warning!! remove or do not use battery
-connect the emmc card reader direct on PC with the main board connected to it. and connect micro usb cable on the charging port
-open miracle emmc plus tool and wait to identify or detect it as PHYSICAL DRIVE
-- when detected just hit factory reset and done.
- remove all connection..
-reassemble the unit, turn it on, wait a few minutes for erasing .and dial emergency *#813# for frp
done
tnx... sir
