John_0031
Registered
Gandang umaga mga ka ANT baka meron po kayong naitabing firmware nito or backup
need ko lng po samalat po sa makaka pansin mabuhay po kayo Godbless
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 2.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM6)
[system]Reading info, wait...
Build ID: LMY47I
Display ID: l700_lyx_l47_welcome_c_480x1014_en_yl_v07
Version: 9.1
Model: A5
Brand: OPPO
Device: A5
Manufacturer: Android
Mediatek Version Release: ALPS.L1.MP6.V2_WEG.L_P73
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
Region: US
This phone have FRP partition.
IMEI[1]: 358234467943331
IMEI[2]: 358234467943349
Wait untill phone will start charging.
[0]All done.
https://postimg.cc/9R2tkvfn
https://postimg.cc/1gwrJ9yF
maraming salamat po...
need ko lng po samalat po sa makaka pansin mabuhay po kayo Godbless
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 2.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM6)
[system]Reading info, wait...
Build ID: LMY47I
Display ID: l700_lyx_l47_welcome_c_480x1014_en_yl_v07
Version: 9.1
Model: A5
Brand: OPPO
Device: A5
Manufacturer: Android
Mediatek Version Release: ALPS.L1.MP6.V2_WEG.L_P73
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
Region: US
This phone have FRP partition.
IMEI[1]: 358234467943331
IMEI[2]: 358234467943349
Wait untill phone will start charging.
[0]All done.
https://postimg.cc/9R2tkvfn
https://postimg.cc/1gwrJ9yF
maraming salamat po...
