Oppo A83 CPH1729 Password & FRP Done via MRT TP Tusok
Oppo A83 Ver-A.23
1- Open MRT_2.60
- MTK_Tools
- Format(Ulock)
- EMMC_Flash_Init_1
- Oppo Only
Click START
2- TestPoint Tusok Mode
- NakaConnect Po ang Battery
- 3 to 6x ko tinusok hehe
Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM38
>>> Device driver identification:
MediaTek USB Port_V1632
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x00000003A3E00000 -> 14910M
Flash ID: 0x150100514536334D
Flash Name: Samsung_Unknow
Flash symbol: QE63MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM44
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Writeing Mobile data userdata ...
Corresponding operation completed!!!
FRP BYPASS *#812#
All is Done
Oppo A83 Ver-A.23
1- Open MRT_2.60
- MTK_Tools
- Format(Ulock)
- EMMC_Flash_Init_1
- Oppo Only
Click START
2- TestPoint Tusok Mode
- NakaConnect Po ang Battery
- 3 to 6x ko tinusok hehe
Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM38
>>> Device driver identification:
MediaTek USB Port_V1632
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x00000003A3E00000 -> 14910M
Flash ID: 0x150100514536334D
Flash Name: Samsung_Unknow
Flash symbol: QE63MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM44
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Writeing Mobile data userdata ...
Corresponding operation completed!!!
FRP BYPASS *#812#
All is Done
Last edited by a moderator: