troy18
Premium 2024
Firmware
Pm For Password or Use Triangle
Card found : S/N : 633D36BC , v0136
Chinese Miracle II [MTK module] v 1.58
Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D433034470203C8031A70A9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D433034470203C8031A70A9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E2C00000
[eMMC] : FLASH_UCP : 3628 MiB [eMMC 4 GiB]
DEV RID : 0x1B6B02AEC0129BF7BE5CD380A15B35F9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : F1s
ProdName : F1s
ProdModel : F1s
Device : F1s
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
Done!
Elapsed: 00:00:16
Reconnect Power/Cable!
Operation : Flash [ v1.58 ]
======= Flash
Nothing to flash! Select file first!
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D433034470203C8031A70A9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D433034470203C8031A70A9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E2C00000
[eMMC] : FLASH_UCP : 3628 MiB [eMMC 4 GiB]
DEV RID : 0x1B6B02AEC0129BF7BE5CD380A15B35F9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : F1s
ProdName : F1s
ProdModel : F1s
Device : F1s
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
FW Size : 1329 MiB
Scatter saved to : C:\Users\ADMIN\Downloads\Compressed\Firmware\MT6580__F1s__F1s__F1s__7.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\
All done!
Done!
Elapsed: 00:07:53
Reconnect Power/Cable!
Last edited by a moderator:
