DOWNLOAD oppo f3 clone mt6580.7.0 firmware cm2 back up

[jhun1308]

good morning to all share ko lng po oppo f3 clone mt6580.7.0 firmware cm2 back up





Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344731640487002012011151
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A48344731640487002012011151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x3CE96C881C130E02ED1DE7AB5AB8CA91
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : F3
ProdName : F3
ProdModel : F3
Device : F3
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1057 MiB
Scatter saved to : C:\Users\JR\Desktop\MT6580__F3__F3__F3__7.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!
Elapsed: 00:07:02
Reconnect Power/Cable!




https://mega.nz/#!bYJSDYDK!Cg7cR0tDDKfAz2MlbDsSB80UxjB-EAWkV1aeAjO4wNU

note may pass.. pm.. me

 

[martians]

badly needed boss may napatay me hehe pwede pabulong password

 

[0909]

t hanks b0ss

 

[JIMROD]

thanks for sharing boss..

 

[jhun1308]

badly needed boss may napatay me hehe pwede pabulong password

pass.. pm. sent

 

[ryknow09]

boss pa pm ng pass maraming salamats

 

[jhun1308]

sir ryknow09 kilan pa po cnxa npo ngaun lng ako nakapag ope nag upload kc ako ng files kng need nyo po pki pm. nlang sorry po talaga salamat

 

[SuperMario]

sir pa pm po ng password,, salamay sir

 

[alexan]

password reported.. magtatsulok sa tatsulok ni tread starter

 

[jhun1308]

sir pa pm po ng password,, salamay sir

hit thanks if you like my post no thanks no password

sa tatsolok na pass.. nyan

 

[alnor21]

pa pm ng pasword idol

 

[jhun1308]

pa pm ng pasword idol

sa tatsulok na boss ang pass nyan

 

[jhun1308]

CO. remarbz718 PASSWORD SENT PO PA HIT NMAN NG THANKS BUTTON

 

[PHONE CARE]

pa password din po ako thanks

 

[jhun1308]

sa tatsulok nalang po mga lodi andon na po ang pass. nyan

 

[jafetlanuza]

thankz bos

 

[jafetlanuza]

manga bos pa pm nman password., thankzz

 

[waymond]

good morning to all share ko lng po oppo f3 clone mt6580.7.0 firmware cm2 back up





Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344731640487002012011151
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A48344731640487002012011151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x3CE96C881C130E02ED1DE7AB5AB8CA91
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : F3
ProdName : F3
ProdModel : F3
Device : F3
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1057 MiB
Scatter saved to : C:\Users\JR\Desktop\MT6580__F3__F3__F3__7.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!
Elapsed: 00:07:02
Reconnect Power/Cable!




https://mega.nz/#!bYJSDYDK!Cg7cR0tDDKfAz2MlbDsSB80UxjB-EAWkV1aeAjO4wNU

note may pass.. pm.. me

thanks for sharing boss god blesss

 

[dokens002]

pm ng pass boss.