HELP ME oppo f7 cph1819 logo

[kenneth]

Anu kaya tong error na mga boss

Hydra MediaTeK Tool Ver 1.0.3 Build 32
Windows 7 Service Pack 1 (Version 6.1, Build 7601, 32-bit Edition)
Intel(R)Core(TM) i5-2430M CPU @ 2.40GHz
Intel(R) HD Graphics 3000
Ram Installed : 3 GB
Windows Access Right Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 210100011128
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]


Brand : AUTO Model : AUTO Connection : Flash Mode

=====================================
How To Boot : Remove Batt if possible
* TP Ground Must be near cpu..
* Remove ground upon popup of the message dialog.

Searching for MTK Device...Found
Port Identification :Flashmode BROM
FriendlyName :MediaTek USB Port (COM12)
Device :6&4817b6d&0&3
SymbolicName :\??\USB#VID_0E8D&PID_0003#6&4817b6d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :01/22/2016,3.0.1504.0


Handshaking...Ok

Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0788MT6771 [6771]
hw subcode : 8A00
hw version : CA00
sw version : 0000
Target config : E5
SB : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
FUSEID : 00000000
SECURE VERSION : 05
BL VERSION : FE [SBC+SDA+SEL]

Security Authorization....
Sending[Oppo_F7.auth] Accepted

Preparing Download Agent..
DA : 6771_SWSEC_E0871E87F0.bin
Agent: MTK_DOWNLOAD_AGENT -HYDRA
Ver : MTK_AllInOne_DA_v3.3001.00.00
Init : Loader [1]
Sending : Accepted

Identifying Protocol...
Protocol : New
Synchronization...[ERROR]- NOT SYNC
=============================================
Reasons why it fails due to the following"
1. Harware problem/issues
2. If you did Testpoint Kindly check the parts you Touch/TP
3. Powershortage, try to connect Battery
4. Check or replace usb cable and plug directly to your pc usb port.
=============================================
SYNC
Mode : brom
Preloader Initialization...
Parsing preloader_oppo6771_18311_F9.bin
Init : Accepted

Execute Secondary Loader
Init : Loader [2]
Executing : SYNC

Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 8BBC9D21DFcc4nKtPbSYNQk3gdQuuvUohikCNPd1x
ERAM Size : 0x0000000000040000 -256 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000000400000 -4 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 90012PGYxyRiwxHvRj3QLQtcPDYEmXWQ1zcVq - HCG8a4

DA Speed : high-speed

Reading GPTNot Valid GPT
MTK Phone Loader is NOW RUNNING.

Reading Device UniqueID, RAM and Flash Chip Info...
ERROR : ACK : 0x00010009[]

Reading GPTNot Valid GPT

Flashing Selected Partitions....
- preloader[preloader_oppo6771_17331.bin] 512 KB Erasing..
ERROR : ACK : 0x00010009[]Failed Flash ->
ERROR : ACK : 0xC0010001[STATUS_ERR] = Failed
=====================================

Elapsed Time : 00:00:31

kaya pakaya to after flashing sa hydra namatay ganyan error
kaya kaya via isp emmc sa hydra to?

 

[russelldregz]

up

 

[kenneth]

up lng po

 

[j4m2_6]

bka my tama n emmc boz

 

[surgeon]

boss nahanapan moo paraan yung oppo f7 hang logo

 

[yowzed]

boss nahanapan moo paraan yung oppo f7 hang logo

Na try mo ba flash ng stock firmware?