DOWNLOAD Qnet B32 FIRMWARE Back up via CM2

[JIMROD]

Card found : 398C1945 , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


Operation : Read Flash [ v1.03 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : sc6533g_XS11_N800
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : gc9108/gc9102/st7735s/gc9106/nv3021
[7] : bf3a01serial/bf3a02/gc6123/gc6133/sp0821
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2018-12-13_10:29:11
[12] : N800_Qnet_V04

Saved to : C:\Users\JIMROD\Desktop\
Saved as : SC6533G_4MiB_sc6533g_XS11_N800_N800_Qnet_V04_2018-12-13_102911.ilod


Done!
Elapsed: 00:01:52

Reconnect Power/Cable!

FIRMWARE: https://mega.nz/#!vOJG3KoS!2ohWALziXBi_F428E0hjNOpiMGND55P3HiN71MdaxdU

​

 

[troy18]

good morning sir wala na po ung fw link nito salamat po....