mmssanmiguel
Registered
need ko mga master, salamat
PinoyTechnician
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
HELP ME Qnet glory g15 firmware
- Thread starter mmssanmiguel
- Start date
slyboy_12
Registered
ito sir back up sa pinag reset ko Privacy Password Qnet Glory 15
password username ko d2 sa tahanan. pa try na lang po..
password username ko d2 sa tahanan. pa try na lang po..
| Card found : S/N : DF18A9xxx , v0139 Chinese Miracle II [MTK module] v 1.58 Operation : Reset Privacy Lock [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 20 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 1501004E35585A4D4201DCB5CE97A1A7 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BMZX5 [eMMC] : FLASH_CID : 1501004E35585A4D4201DCB5CE97A1A7 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000E9000000 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB] DEV RID : 0xA74E9DE18E31537D20D8A9A4837C773A INT RAM : 0x00020000 EXT RAM : 0x20000000 [512 MiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Checking data ... Process block #1 Process block #2 Privacy Lock reset Ok! Done! Elapsed: 00:00:32 Reconnect Power/Cable! Card found : S/N : DF18Axxx , v0139 Chinese Miracle II [MTK module] v 1.58 Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 20 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 1501004E35585A4D4201DCB5CE97A1A7 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BMZX5 [eMMC] : FLASH_CID : 1501004E35585A4D4201DCB5CE97A1A7 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000E9000000 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB] DEV RID : 0xA74E9DE18E31537D20D8A9A4837C773A INT RAM : 0x00020000 EXT RAM : 0x20000000 [512 MiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... xGPT : Normalize settings Ok! Brand : Qnet ProdName : Glory_G15 ProdModel : T702 Device : Glory_G15 AndroidVer: 5.1 CU_SWVer : V1.0.2 MTKxCPU : MT6580 MTKxPRJ : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55 [Read Ok] : preloader_hct6580_weg_a_l.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC Android Info saved MAUI Meta DB saved |
Media.Tech
Registered
boss g11 naman po yung sainyo same lang ba sila ng g15
GEMICHA
Registered
same lang yan bro
celltech101
Registered
ayaw mag touch sir..qnet glory g15
GSM_JAGUAR
Expired Account
same po
GSM_JAGUAR
Expired Account
touch not working po
intsek_toh77
Expired Account
- Joined
- Apr 29, 2015
- Messages
- 753
- Reaction score
- 316
- Points
- 281
- Location
- Cabanatuan City. NUEVA ECIJA
slyboy_12
Registered
Working pa po ung link n binigay ko..
striker_88
Registered
- Joined
- Jul 28, 2015
- Messages
- 208
- Reaction score
- 30
- Points
- 1
- Location
- Ipil, Zamboanga Sibugay Province
Try muna reformat using CM2 boss.
artzaivin
Premium Account
sir paudate file mo salamat
artzaivin
Premium Account
sir wala ibang link firmware mo
slyboy_12
Registered
Tagal na nito sir wala n ung computer na gamit q.. bk meron nk pag download n mga kasama natin d2..
Senxa n po.
GEMICHA
Registered
wait lang upload ko