Qnet Jazz J1

[gsmohn]

patoLong po mga ka ant kung anu problema nito unit Qnet Jazz J1 po..
pina flash ko na at hindi sa di diritso errror po.
anu tu emmc na ba??

ito po pic

https://www.facebook.com/photo.php?fbid=1861880580607242&set=a.141407092654608&type=3&theater

 

[yulznagil]

mmc test mo boss kung error sera na mmc nyan

 

[joemary]

try m ibang tools. try m din ibang fw.

 

[meerlgsm]

try mo sa settings ng CM2MTK boss SP Other, NAND Init Mode then piliin mo yung P1-2, then ulitin mo format
kung ayaw, try mo NCK, depende din sa tools yan saka wag mo ipost sa facebook para madali kang matulungan

 

[gsmohn]

mga 4 fw na gamit q dito mga boss pero wla pa din

 

[meerlgsm]

kung ayaw sa CM2MTK ay etry mo rin sa NCK kahit crack pwede or sa SP Tools

 

[gsmohn]

nasubokan ko na rin sa NCK crack boss

 

[meerlgsm]

try mo muna boss EMMC Test. pag read and write PASS ay okey pa yan
pero pag Read Only na lang ay dina kaya yan kase may tama na EMMC

 

[gsmohn]

Processing Miscellaneous test
MSC : BatteryLevel : 3987 mV

[Processing] FlashMemory Read-Write test
[eMMC] : [HYNIX] , d1G4 , 0xE7000000 , 3696 MiB
[eMMC] : CID : 90014A4834473164048605A29DA080F1

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

[Processing] RAM Read-Write test
[DRAM] : 0x20000000 , 512 MiB

[DRAM] : ADDRESS BUS test
[PASSED] : Bus Count : 0x1C
[DRAM] : DATA BUS test
[PASSED] : Bus Count : 0x1F
[DRAM] : PATTERN test
[PASSED] : PATTERN Ok
[DRAM] : INCDEC test
[PASSED] : INCDEC Ok

All Done!

Done!
Elapsed: 00:01:34
Reconnect Power/Cable!

 

[gsmohn]

ito inihintay ko boss mag bigay siya ng pass hahaha


https://antgsm.com/showthread.php?p=820230#post820230

 

[meerlgsm]

natry mo na boss sa settings ng CM2MTK

Ciick mo yung Settings tab ng CM2 sa ibabaw

then SP Other

NAND Init Mode

P1-2

 

[joemary]

try m flash user data only nck crack tools