Qnet lutos ma konat na password done

JULAY20

JULAY20

Moderator
Staff member
Joined
Aug 6, 2014
Messages
10,050
Reaction score
2,730
Points
1,611
Location
KORONADAL CITY
qnet lutos

Action : Format UserData.
Selected 0-By CPUM 0-By CPUMT6582
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM4)
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000
[5]Part: SECCFG Begin: 0xb00000 Len: 0x40000
[6]Part: UBOOT Begin: 0xb40000 Len: 0x80000
[7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000
[8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000
[9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000
[10]Part: MISC Begin: 0x1800000 Len: 0xc0000
[11]Part: LOGO Begin: 0x18c0000 Len: 0x100000
[12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000
[13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000
[14]Part: ANDROID Begin: 0x2fc0000 Len: 0xfa00000
[15]Part: CACHE Begin: 0x129c0000 Len: 0x700000
[16]Part: USRDATA Begin: 0x130c0000 Len: 0xc4c0000
[17]Part: BMTPOOL Begin: 0xffff0028 Len: 0x0
Offset: 0x1f554000 Count: 18
Detecting format adress....wait!

FORMAT NAND FLASH : BEGIN: 0x129c0000 - LEN: 0x700000
FORMAT NAND FLASH : BEGIN: 0x130c0000 - LEN: 0xc4c0000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Click to expand...


http://postimage.org/

http://postimage.org/


sana maka tolong reference lang po



​
 
Last edited by a moderator:
You must log in or register to reply here.
Who read this thread (Total readers: 0)
No registered users viewing this thread.
Back
Top