Hydra Tools
Link :Realme C12 RMX2185
-MTK
-Flash
-volume down and up
-insert usb
hintayin nalang magdasal na walang error
Hydra Tool Ver 2023.4.12.0 -
Windows 10 (Version 22H2, OS Build 19045.1949, 64-bit Edition)
Intel(R)Core(TM) i5-3210M CPU @ 2.50GHz
Intel(R) HD Graphics 4000
Ram Installed : 4 GB
Windows Access Right : Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 220400024825
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MTK Flash Function...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1632 (COM3)
Device : /5&262ed807&0&3
SymbolicName : \\?\usb#vid_0e8d&pid_0003#5&262ed807&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM3] Ok
Handshaking...Ok
HwCode : 0766 {MT6765/MT8768t}
Hwver : 0000
Target config : E5
SBC : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
SWJTAG : 04 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA00
SW Ver : 0000
ME_ID : C3AD140060FAD304D3E712E01F64AB4C
SOC_ID : 20CEB23664BA0CA94431A4C2C2AA0A28B0BFC1EBFF2CB3B5196BF21DEEF459F6
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200BC4
Starting to dump...
Prel Size : 0x0003DBB4
Successfully dump preloader.. [C:\Hydra Tool\Boot\PreloaderDump\preloader_oppo6765.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 90014A6842386150
Sending auto preloader from dump... [preloader_oppo6765.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x000000000003A000-232 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000001000000-16 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A68423861503E0300482844184F - hB8aP>
HW-CODE : 0x766
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA00
SW-VERSION : 0x0
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 49
--------------- Reading build.prop content ---------------
Product : oppo6765
ID : QP1A.190711.020
SDK : 29
Release : 10
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-01-05
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_oppo6765.bin]
*Creating Scatter file... C:\Hydra Tool\Backup\MTKBKUP\0766_C3AD140060FAD304D3E712E01F64AB4C\Auto\041623165139\6765_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 15.867 MB = Ok
- persist(persist.bin), 48 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- oppo_custom(oppo_custom.bin), 1024 KB = Ok
- opporeserve1(opporeserve1.bin), 8 MB = Ok
- opporeserve2(opporeserve2.bin), 128 MB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
Backup Done!!!
Write Selected Partitions..
- preloader(preloader_oppo6765.bin), 246.926 KB[Erasing...Ok] Status :C0010001 Error= Failed
- recovery(recovery.img), 98 MB[Erasing...Ok] = Ok
- opporeserve1(opporeserve1.img), 4.398 MB[Erasing...Ok] = Ok
- opporeserve2(opporeserve2.img), 17.333 MB[Erasing...Ok] = Ok
- opporeserve3(opporeserve3.img), 61.507 MB[Erasing...Ok] = Ok
- oppo_custom(oppo_custom.img), 26 KB[Erasing...Ok] = Ok
- vbmeta_system(vbmeta_system.img), 1.484 KB[Erasing...Ok] = Ok
- vbmeta_vendor(vbmeta_vendor.img), 1.484 KB[Erasing...Ok] = Ok
- persist(persist.img), 744.168 KB[Erasing...Ok] = Ok
- proinfo(proinfo.img), 2.016 KB[Erasing...Ok] = Ok
- md1img(md1rom.img), 53.609 MB[Erasing...Ok] = Ok
- spmfw(spmfw.img), 62.578 KB[Erasing...Ok] = Ok
- scp1(tinysys-scp.bin), 643.469 KB[Erasing...Ok] = Ok
- scp2(tinysys-scp.bin), 643.469 KB[Erasing...Ok] = Ok
- sspm_1(sspm.img), 421.5 KB[Erasing...Ok] = Ok
- sspm_2(sspm.img), 421.5 KB[Erasing...Ok] = Ok
- nvram(nvram.bin), 63.875 MB[Erasing...Ok] = Ok
- cdt_engineering(cdt_engineering.img), 64 Bytes[Erasing...Ok] = Ok
- special_preload(special_preload.img), 12.637 MB[Erasing...Ok] = Ok
- my_custom(my_custom.img), 4.293 MB[Erasing...Ok] = Ok
- lk(lk.bin), 2.61 MB[Erasing...Ok] = Ok
- lk2(lk.bin), 2.61 MB[Erasing...Ok] = Ok
- boot(boot.img), 32 MB[Erasing...Ok] = Ok
- logo(logo.bin), 1.899 MB[Erasing...Ok] = Ok
- dtbo(dtbo.img), 191.016 KB[Erasing...Ok] = Ok
- tee1(tz.img), 490.719 KB[Erasing...Ok] = Ok
- tee2(tz.img), 490.719 KB[Erasing...Ok] = Ok
- super(super.img), 5.933 GB[Erasing...Ok] = Ok
- vbmeta(vbmeta.img), 3.953 KB[Erasing...Ok] = Ok
- cache(cache.img), 284.191 KB[Erasing...Ok] = Ok
- userdata(userdata.img), 1.594 MB[Erasing...Ok] = Ok
Rebooting Device...
Rebooting Device...
Reboot Option : RebootToNormal
Rebooting Operation Done!!!! = Ok
----------------------------------
Elapsed Time : 00:05:22
Link :Realme C12 RMX2185
-MTK
-Flash
-volume down and up
-insert usb
hintayin nalang magdasal na walang error
Hydra Tool Ver 2023.4.12.0 -
Windows 10 (Version 22H2, OS Build 19045.1949, 64-bit Edition)
Intel(R)Core(TM) i5-3210M CPU @ 2.50GHz
Intel(R) HD Graphics 4000
Ram Installed : 4 GB
Windows Access Right : Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 220400024825
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MTK Flash Function...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1632 (COM3)
Device : /5&262ed807&0&3
SymbolicName : \\?\usb#vid_0e8d&pid_0003#5&262ed807&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM3] Ok
Handshaking...Ok
HwCode : 0766 {MT6765/MT8768t}
Hwver : 0000
Target config : E5
SBC : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
SWJTAG : 04 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA00
SW Ver : 0000
ME_ID : C3AD140060FAD304D3E712E01F64AB4C
SOC_ID : 20CEB23664BA0CA94431A4C2C2AA0A28B0BFC1EBFF2CB3B5196BF21DEEF459F6
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200BC4
Starting to dump...
Prel Size : 0x0003DBB4
Successfully dump preloader.. [C:\Hydra Tool\Boot\PreloaderDump\preloader_oppo6765.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 90014A6842386150
Sending auto preloader from dump... [preloader_oppo6765.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x000000000003A000-232 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000001000000-16 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A68423861503E0300482844184F - hB8aP>
HW-CODE : 0x766
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA00
SW-VERSION : 0x0
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 49
--------------- Reading build.prop content ---------------
Product : oppo6765
ID : QP1A.190711.020
SDK : 29
Release : 10
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-01-05
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_oppo6765.bin]
*Creating Scatter file... C:\Hydra Tool\Backup\MTKBKUP\0766_C3AD140060FAD304D3E712E01F64AB4C\Auto\041623165139\6765_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 15.867 MB = Ok
- persist(persist.bin), 48 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- oppo_custom(oppo_custom.bin), 1024 KB = Ok
- opporeserve1(opporeserve1.bin), 8 MB = Ok
- opporeserve2(opporeserve2.bin), 128 MB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
Backup Done!!!
Write Selected Partitions..
- preloader(preloader_oppo6765.bin), 246.926 KB[Erasing...Ok] Status :C0010001 Error= Failed
- recovery(recovery.img), 98 MB[Erasing...Ok] = Ok
- opporeserve1(opporeserve1.img), 4.398 MB[Erasing...Ok] = Ok
- opporeserve2(opporeserve2.img), 17.333 MB[Erasing...Ok] = Ok
- opporeserve3(opporeserve3.img), 61.507 MB[Erasing...Ok] = Ok
- oppo_custom(oppo_custom.img), 26 KB[Erasing...Ok] = Ok
- vbmeta_system(vbmeta_system.img), 1.484 KB[Erasing...Ok] = Ok
- vbmeta_vendor(vbmeta_vendor.img), 1.484 KB[Erasing...Ok] = Ok
- persist(persist.img), 744.168 KB[Erasing...Ok] = Ok
- proinfo(proinfo.img), 2.016 KB[Erasing...Ok] = Ok
- md1img(md1rom.img), 53.609 MB[Erasing...Ok] = Ok
- spmfw(spmfw.img), 62.578 KB[Erasing...Ok] = Ok
- scp1(tinysys-scp.bin), 643.469 KB[Erasing...Ok] = Ok
- scp2(tinysys-scp.bin), 643.469 KB[Erasing...Ok] = Ok
- sspm_1(sspm.img), 421.5 KB[Erasing...Ok] = Ok
- sspm_2(sspm.img), 421.5 KB[Erasing...Ok] = Ok
- nvram(nvram.bin), 63.875 MB[Erasing...Ok] = Ok
- cdt_engineering(cdt_engineering.img), 64 Bytes[Erasing...Ok] = Ok
- special_preload(special_preload.img), 12.637 MB[Erasing...Ok] = Ok
- my_custom(my_custom.img), 4.293 MB[Erasing...Ok] = Ok
- lk(lk.bin), 2.61 MB[Erasing...Ok] = Ok
- lk2(lk.bin), 2.61 MB[Erasing...Ok] = Ok
- boot(boot.img), 32 MB[Erasing...Ok] = Ok
- logo(logo.bin), 1.899 MB[Erasing...Ok] = Ok
- dtbo(dtbo.img), 191.016 KB[Erasing...Ok] = Ok
- tee1(tz.img), 490.719 KB[Erasing...Ok] = Ok
- tee2(tz.img), 490.719 KB[Erasing...Ok] = Ok
- super(super.img), 5.933 GB[Erasing...Ok] = Ok
- vbmeta(vbmeta.img), 3.953 KB[Erasing...Ok] = Ok
- cache(cache.img), 284.191 KB[Erasing...Ok] = Ok
- userdata(userdata.img), 1.594 MB[Erasing...Ok] = Ok
Rebooting Device...
Rebooting Device...
Reboot Option : RebootToNormal
Rebooting Operation Done!!!! = Ok
----------------------------------
Elapsed Time : 00:05:22
Last edited by a moderator:
