[BROM] FACTORY RESET / ERASE FRP
=====================================
How To Boot : Power off phone
* BROM : Turn Off Phone, Hold VOL + And VOL- Then Insert Cable
* Preloader : Just Insert cable!
=====================================
Waiting For Device Connection.... OK
Initializing usb... OK
Reading Hardware Information... OK
Chipset : MT6768(Helio P65/G85 k68v1)
HW : 0x0
WDT: 0x10007000 Uart: 0x11002000
Brom Addr : 0x100a00 DA Addr : 0x201000 CQDMA Addr: 0x10212000
Var1: 0x25
HW code : 0x707
Security Config... OK
SBC: True SLA: False DAA: True SWJTAG: True
Mem read auth: True Mem write auth: True
MEID: B95FAA65C08C81537D00CF7824D25ED5
Loading payload: mt6768_payload.bin, 0x264 bytes
Sending payload... OK
OK
**** New Brom Exploit ****
Tips : Please Don't Remove battery and usb cable!
Process may take 1 to 2 Minutes ( Please Wait )
Analyzing... preloader_-8DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2136.bin... OK
preloader to Jumping... OK
DRAM config needed for : 1501004450364441
Sending EMI data... OK
Reading Storage Information... OK
EMMC ID : DP6DAB
EMMC CID : 1501004450364441420233bfd0d93859
Boot1 : 4 MB Boot2 : 4 MB RPMB : 16 MB
Userarea : 58.24 GB
Devices : Realme C25
Models : RMX3193, RMX3191
Erasing FRP... OK
Erasing Userdata... OK
Erasing FRP... OK
Erasing Userdata... OK
Tips : Please Disconnect the cable and turn on your phone it manually.
_____________________________________________________________
TFTUnlock-2023-3.1.1.1
Elapsed Time : 01 minutes : 48 seconds
