REFERENCE Redmi 9a Password & FRP Done via UMT

[EJSCriminal]

Redmi 9a

Tools:

1. UMT Dongle
2. Data Cable

Procedure:

1. Open UMT MTK
2. Select Xiaomi Redmi 9A
3. Click Format FS Do
4. Connect Data Cable

FRP ISSUE:

Procedure:

1. Open UMT MTK
2. Select Xiaomi Redmi 9A
3. Click Reset FRP
4. Connect Data Cable

Logs:

Brand : Xiaomi
Model : Redmi 9A
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM8
Port Name: MediaTek USB Port (COM8)
Path: \\?\usb#vid_0e8d&pid_0003#5&1c6bdcf5&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM8)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.3]

Logs:

Brand : Xiaomi
Model : Redmi 9A
Operation : Reset FRP
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM8
Port Name: MediaTek USB Port (COM8)
Path: \\?\usb#vid_0e8d&pid_0003#5&1c6bdcf5&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM8)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.3]

Done.