GSMKing
Registered
- Joined
- Apr 8, 2016
- Messages
- 302
- Reaction score
- 120
- Points
- 31
Note: Kahit po laman na files yung drive na gagamitin natin safe po ito. Walang mwawala kung sunod mo lang yung lahat ng steps.
Environment Used:
Advantages:
Materials:
Pag meron ka nun lahat. Then lets START! ~X(
1. Go to My Computer. Check mo kung ilang partition meron ka.
So ang gagamitin natin is Drive (D) or (E) sa iba.
2. Extract natin yung ISO file dun sa Drive (D) or (E) gamit ang WinRar or any software.
Dapat ganito yung itsura nya.
3. Pagkatapos ma extract. Go to Disk Management. Search mo dun sa search bar.
4. Select mo (E) or (D). Right click and select "Mark partition as Active". Then Click "Yes".
5. Restart.
Pag nasa Install windows ka. Do the following in Step 5. Wag ka muna tumuloy. [-X
6. Press keyboard shortcut "SHIFT + F10". Lalabas yung command prompt.
7. Type these commands.
diskpart
wait mo lalabas yung DISKPART. Then
list disk
select disk 0
list partition
select partition 2
Kung saan po natin e install ang windows yun po e select natin na partition.
active
Kanina yung active is yung partition 3 or Drive (E) or (D). Ngayon nman balik natin sa partittion 2 which is our Drive (C)
see image for reference.
8. Close mo yung command prompt. Pwde ka na tumuloy sa steps on installing windows. :clap
Environment Used:
- Windows 7 Ultimate with IOS10 Skin
Advantages:
- So far ito yung na pinaka mabilis
Materials:
- Desktop PC or Laptop (Most Important)
- Windows 7, 8, 10 ISO
Pag meron ka nun lahat. Then lets START! ~X(
1. Go to My Computer. Check mo kung ilang partition meron ka.
So ang gagamitin natin is Drive (D) or (E) sa iba.
2. Extract natin yung ISO file dun sa Drive (D) or (E) gamit ang WinRar or any software.
Dapat ganito yung itsura nya.
3. Pagkatapos ma extract. Go to Disk Management. Search mo dun sa search bar.
4. Select mo (E) or (D). Right click and select "Mark partition as Active". Then Click "Yes".
5. Restart.
Pag nasa Install windows ka. Do the following in Step 5. Wag ka muna tumuloy. [-X
6. Press keyboard shortcut "SHIFT + F10". Lalabas yung command prompt.
7. Type these commands.
diskpart
wait mo lalabas yung DISKPART. Then
list disk
select disk 0
list partition
select partition 2
Kung saan po natin e install ang windows yun po e select natin na partition.
active
Kanina yung active is yung partition 3 or Drive (E) or (D). Ngayon nman balik natin sa partittion 2 which is our Drive (C)
see image for reference.
8. Close mo yung command prompt. Pwde ka na tumuloy sa steps on installing windows. :clap
Last edited by a moderator: