- Joined
- Dec 28, 2022
- Messages
- 6
This tutorial is applicable for iPhone 8 to iPhone 11 series. (Correct me if I'm wrong.)
Tools needed:
!. LCD replacement
2. iCopy Plis 2.2 (Different serial read/write tools different softwares) but currently iCopy Plus yung gamit ko.
3. Lightning cable
4. Qianli Helper software for iCopy Plus 2.2
5. 3Utools
6. Laptop/PC

Ang phone na ito ay for LCD replacement. Replaced na pala ang LCD ng Unit na ito pero hindi binalik ang truetone.

Step 1: connect ang phone sa computer then open 3Utools. Navigate sa view iDevice Info then copy cover board number.

Step 2: Open Qianli Helper software then navigate "Origin Color restore without origin LCD button."

Step 3: Connect iCopy Plus 2.2 sa computer using USB Lightning cable then connect your new LCD replacement sa iCopy JIG.
Step 4: Click Restore sa iCopy Helper.

Step 5: Mag aauto-write yung SN sa new LCD via Qian-Li Helper.
Step 6: Assemble the phone and check.

And done! May truetone na ulet yung phone.
Challenges encountered: Yung Status ng phone was disabled pa since yung broken LCD may touch issue baka nag exceed na ang passcode attempt.
Restore ko lang via 3Utools then wait for 3 hours para mawala yung disabled.
Repair Difficulty: Medium
Tandaan: Mas madali ang repair pag may proper tools. Kaya invest na.
Thank you Moderators and Admins for approving.
Tools needed:
!. LCD replacement
2. iCopy Plis 2.2 (Different serial read/write tools different softwares) but currently iCopy Plus yung gamit ko.
3. Lightning cable
4. Qianli Helper software for iCopy Plus 2.2
5. 3Utools
6. Laptop/PC

Ang phone na ito ay for LCD replacement. Replaced na pala ang LCD ng Unit na ito pero hindi binalik ang truetone.

Step 1: connect ang phone sa computer then open 3Utools. Navigate sa view iDevice Info then copy cover board number.

Step 2: Open Qianli Helper software then navigate "Origin Color restore without origin LCD button."

Step 3: Connect iCopy Plus 2.2 sa computer using USB Lightning cable then connect your new LCD replacement sa iCopy JIG.
Step 4: Click Restore sa iCopy Helper.

Step 5: Mag aauto-write yung SN sa new LCD via Qian-Li Helper.
Step 6: Assemble the phone and check.

And done! May truetone na ulet yung phone.
Challenges encountered: Yung Status ng phone was disabled pa since yung broken LCD may touch issue baka nag exceed na ang passcode attempt.
Restore ko lang via 3Utools then wait for 3 hours para mawala yung disabled.
Repair Difficulty: Medium
Tandaan: Mas madali ang repair pag may proper tools. Kaya invest na.
Thank you Moderators and Admins for approving.