mga boss share ko lng c3303i auto power on and auto shut down sapol sa flashing via z3x...
PROCEDURE:
OPEN 2G TOOL
SELECT MODEL C3303
LOAD FLASH FILE
THICK FIRMWARE
THEN WAIT NA MATAPOS
pasinsya n po d ko na picture nag mamadali si costumer...
ito po logs:
Selected model: C3303
Selected com port: COM7
Selected speed port: 921600
Press "1" + "3" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Sending part LCDACT:
Erasing... OK
Sending... OK
Sending part MAIN:
Erasing... OK
Sending... OK
Sending part DSP:
Erasing... OK
Sending... OK
Sending part ROOT:
Erasing... OK
Sending... OK
Sending boot sector:
Erasing... OK
Sending... OK
Sending TFS... OK
Sending CSC... OK
Download - ok
Elapsed time: 642 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
SANA PO MAKATULONG SA MGA KAGAYA KUNG BAGUHAN
PROCEDURE:
OPEN 2G TOOL
SELECT MODEL C3303
LOAD FLASH FILE
THICK FIRMWARE
THEN WAIT NA MATAPOS
pasinsya n po d ko na picture nag mamadali si costumer...
ito po logs:
Selected model: C3303
Selected com port: COM7
Selected speed port: 921600
Press "1" + "3" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Sending part LCDACT:
Erasing... OK
Sending... OK
Sending part MAIN:
Erasing... OK
Sending... OK
Sending part DSP:
Erasing... OK
Sending... OK
Sending part ROOT:
Erasing... OK
Sending... OK
Sending boot sector:
Erasing... OK
Sending... OK
Sending TFS... OK
Sending CSC... OK
Download - ok
Elapsed time: 642 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
SANA PO MAKATULONG SA MGA KAGAYA KUNG BAGUHAN