TOTO27
Registered
Samsung clone J500H
preloader_benrui72_wet_lca.bin
Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393010D04D6F095075
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393010D04D6F095075
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x020625CD60E4A0698FA0AC309387E572
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : alps
ProdName : mtk6589_wet_lca
ProdModel : SM-J5008
Device : mtk6589_wet_lca
AndroidVer: 5.1.1
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.8
[Read Ok] : preloader_benrui72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / benrui72_wet_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 602 MiB
Scatter saved to : E:\MT6572__alps__SM-J5008__mtk6589_wet_lca__5.1.1__ALPS.JB3.MP.V1.8\
All done!
Done!
Elapsed: 00:03:29
Reconnect Power/Cable!
Password protected
credits pala dito sa thread ni NITRO http://antgsm.com/showthread.php?t=111688&highlight=samsung+clone+j500h
dahil sa image ng file nya nabuhay ko cp ni tumer
preloader_benrui72_wet_lca.bin
Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393010D04D6F095075
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393010D04D6F095075
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x020625CD60E4A0698FA0AC309387E572
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : alps
ProdName : mtk6589_wet_lca
ProdModel : SM-J5008
Device : mtk6589_wet_lca
AndroidVer: 5.1.1
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.8
[Read Ok] : preloader_benrui72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / benrui72_wet_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 602 MiB
Scatter saved to : E:\MT6572__alps__SM-J5008__mtk6589_wet_lca__5.1.1__ALPS.JB3.MP.V1.8\
All done!
Done!
Elapsed: 00:03:29
Reconnect Power/Cable!
Password protected
credits pala dito sa thread ni NITRO http://antgsm.com/showthread.php?t=111688&highlight=samsung+clone+j500h
dahil sa image ng file nya nabuhay ko cp ni tumer
Last edited by a moderator:
