Samsung e250s note 2 Help

[cloune]

mga bossing patulong naman nito?


ayaw ko muna eh flash sa z3x baka may mas madali pang paraan//

ito po sya..

 

[cloune]

na tapos rin sa wakas..

[ Disable Factory Mode ] Operation: Disable Factory Mode
[ Disable Factory Mode ] Selected model: SHV-E250S
[ Disable Factory Mode ] Selected port: COM9 Z3X BOX Serial Port,
[ Disable Factory Mode ] Software version: 20.5
[ Disable Factory Mode ]
[ Disable Factory Mode ] Waiting ADB device...
[ Disable Factory Mode ] Please, allow USB debugging on phone... OK
[ Disable Factory Mode ] Reading phone info...
[ Disable Factory Mode ] Model: SHV-E250S
[ Disable Factory Mode ] Android version: 4.4.2
[ Disable Factory Mode ] Product code: Not Active
[ Disable Factory Mode ] Phone version: E250SKSUKNI2
[ Disable Factory Mode ] PDA version: E250SKSUKNI2
[ Disable Factory Mode ] CSC version: E250SSKTKNI2
[ Disable Factory Mode ] CSC country code: KOREA
[ Disable Factory Mode ] CSC sales code: SKT
[ Disable Factory Mode ] HW version: E25.06
[ Disable Factory Mode ] Phone S/N: 00000000000
[ Disable Factory Mode ] Modem board: MDM9x15
[ Disable Factory Mode ] RF cal date: 2014.09.23
[ Disable Factory Mode ] IMEI: 355827054404006
[ Disable Factory Mode ] Checking Super user right... true
[ Disable Factory Mode ] Disabling Factory mode... OK







procedure:

1.Phone must be powered on
2.Type *#0808# and select 'DM+MODEM+ADB'
3.Type *#9090# and choose 'DM/DUN over HSIC'
4.reboot phone
5.connect usb cable. and install drivers if needed
6.select samsung diagnostic port in port settings

thinks

 

[workhard23]

boss panu mo flash yan,, medyo nagugulohan ako,, Panu mo Na off yan ???????

 

[Red dragon]

oky... ano po ginawa mo bukod sa hr? ano po history?

 

[iceman03]

flasing ba or openline gagawin mo boss?