What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

samsung g532g dead boot [REPAIR DONE]

34y5w7s.jpg


Opening file: PIT-SM-G532G-15-03-2017_09-07-10.pit

Pit: PIT-SM-G532G-15-03-2017_09-07-10.pit
Entry count: 34

The size of the last section has been updated

BL_G532GDXU1AQA4_CL10452964_QB12351285_REV00_user_low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

HiPower mode is OFF
CMD Pullup Level: 1794 mV
CMD Active Level: 2289 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201052AF0C8343E
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H8G4u , S/N: 052AF0C8 , rev. 01
EMMC NAME (HEX): 483847347592
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H8G4u_052AF0C8_20170524_211624.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 309.01 Kb/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 816.44 Kb/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 61.75 Kb/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 901.50 Kb/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 849.57 Kb/s

All done
 
FullFlashâ„¢ said:
34y5w7s.jpg


Opening file: PIT-SM-G532G-15-03-2017_09-07-10.pit

Pit: PIT-SM-G532G-15-03-2017_09-07-10.pit
Entry count: 34

The size of the last section has been updated

BL_G532GDXU1AQA4_CL10452964_QB12351285_REV00_user_low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

HiPower mode is OFF
CMD Pullup Level: 1794 mV
CMD Active Level: 2289 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201052AF0C8343E
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H8G4u , S/N: 052AF0C8 , rev. 01
EMMC NAME (HEX): 483847347592
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H8G4u_052AF0C8_20170524_211624.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 309.01 Kb/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 816.44 Kb/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 61.75 Kb/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 901.50 Kb/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 849.57 Kb/s

All done
Click to expand...

sir ask ko lang, no need pin out emmc or jtag via micro usb only... salamat sa pag sagot
 
kaya before unlock tingnan niyo muna firmware kailngan wag i downgrade kc paktay pag na downgrade...naka isa ako nyan heheh na deadboot dahil na downgrade ko....
 
boss full flash pa padala ko sayo ang deadboot ko na ganyang unit una frp lang nagawa ko naman sa octopus at z3x kaso walang ng yari ganon pa din frp pa din kaya try ko flash tapos ayon deadboot na pa pm naman ano ng location mo sir thanks
 
phone care said:
boss full flash pa padala ko sayo ang deadboot ko na ganyang unit una frp lang nagawa ko naman sa octopus at z3x kaso walang ng yari ganon pa din frp pa din kaya try ko flash tapos ayon deadboot na pa pm naman ano ng location mo sir thanks
Click to expand...

samuel a. Abaquita
lbc abanao square
2600 baguio city
pickup 09105620201


PS: 100% MAY SIGNAL YAN BASTA HUWAG GALAWIN
BUO MONA PADALA.
 
You must log in or register to reply here.
Back
Top