things you need:
octo box o dongle na activated sa frp tool.
525k or 619k UART Cable,mini usb cable.
combi files from z3x support (use this if sboot is not supported sa first try)
steps to follow:
hard reset muna para makuha yung password
download combi files ng z3x support (take note-dapat exact model,kailangan same binary at baseband pra hindi ma-softbrick)
flash via pda sa z3x yung 'sboot' lang,huwag mag-full flash kung wala kang naka-abang na full firmware (uncheck lahat except sboot)
after ma-flash magreboot yan,shut down mo lng.
open octo frp tool select exact model (sm-g610f),prepare UART cable with 525k resistor.
kung wala pwede 619k.
tick 'reset frp uart' and follow software instructions...
if failed,try another 'sboot' file from another combi files
then repeat..
octo box o dongle na activated sa frp tool.
525k or 619k UART Cable,mini usb cable.
combi files from z3x support (use this if sboot is not supported sa first try)
steps to follow:
hard reset muna para makuha yung password
download combi files ng z3x support (take note-dapat exact model,kailangan same binary at baseband pra hindi ma-softbrick)
flash via pda sa z3x yung 'sboot' lang,huwag mag-full flash kung wala kang naka-abang na full firmware (uncheck lahat except sboot)
after ma-flash magreboot yan,shut down mo lng.
open octo frp tool select exact model (sm-g610f),prepare UART cable with 525k resistor.
kung wala pwede 619k.
tick 'reset frp uart' and follow software instructions...
if failed,try another 'sboot' file from another combi files
then repeat..
Last edited by a moderator: