Magandang umaga po ulit sa lahat, may kunting karanasan na naman ako dito sa isang samsung phone na J7 (2016 series) na nais kong ibahagi kung papaano ko nalagpasan ang mga dinanas na pagsubok hanggang nagawa.
History:
Dumating po sa akin na may pattern lock ang phone at PUK ang sim card (may ikinuwento si customer sa akin na di ko pwedeng ishare sa inyo, kaya humantong sa PUK ang sim card). Sabi ko sa kanya na di ko magagawa ang kanyang sim card problem kung wala na ang sim-bed. Ukol naman sa pattern locked ay di ko rin magagawa ng basta na lang dahil ng suriin ko ay naka FRP lock ang phone. Sabi ko sa kanya na pwedeng ireset ang phone basta't meron syang gmail account na nakalink sa kanyand device. Umalis po sya ng walang paalam, at yun na nga.
dito ko nalaman na naka on ang FRP ng phone,
Pagbalik nya:
Status: Stuck on activation...
... pinuwersang nireset nga kasi nagbabaka sakaling magawa sa sariling sikap, ang problema di alam ang gmail account.
Problema nya ngayon: Stuck on activation na sya.
Mga hakbangin:
Sinubukan ko munang gamitin sa octopus box, subalit ayaw ma reset ang FRP locking ng phone, kasunod ang Z3X box subalit may error pa rin. Hindi ko ginamit ang Real term at iba pang bypass ng FRP sa kadahilanang gusto kong masubukan ang galing ng dalawang boxes.
Since ayaw talagang mareset, ang hint, kailangan ko ng combination files (pinaalam ko muna sa kanya ang mga posibleng mangyayari at sumang ayon naman sya dahil saan saan na raw nya dinala ang phone at di nagawa.
Sinuri ko ang mga combination files sa support ng bawat boxes at ang Z3X lang ang may pinakamababang file size for download, kaya una kong ginamit ang Z3X.
at nang sinubukan ko, nakapasok na po sya sa menu.
di pa natapos ang problema dahil after resetting ng FRP locking,
buti na lang naisipan kong i-factory reset ang phone at naawang bumalik ang baseband,
Note: Nasa september 1, 2016 ang patch date ng firmware, at kadalasan pag nasa mga ganitong release date na masyadong bago pa ay mahirap maiunlock ang telepono gamit ang ating mga boxes. Subalit sinubukan ko pa rin at baka sakali,
sample tests,
Z3x,
Octopus (di ko nakunan ng screen shot pero pareho lang din na may error, sa read code ay failed sa direct unlock ay ayaw din kasi kailangan pa ng root permission), Kaya sinubukan kong maghanap ng root file, sa kadahilanang wala akong makita kaya naisipan ko na naman ang free account ng chimera upang mairoot ang phone at eto na nga,
at after rooting,
Buti na lang at nagkataong meron akong available na nadownload mula sa support ng Octopus box na mababa sa september at nasa july, bale magkasunod lang na build. Kaya sinubukan kong ipasok ang firmware gamit ang Octopus box.
Logs ng flashing,
<aside>
Tried unlock ulit via Octopus,
<aside>
Naku read code at direct unlock ayaw kahit ang security patch level nya ay nasa 2016-07-01 na... at phone is not rooted na naman daw, naisipan kong di bale na, since dating may sabi si Z3X na kailangang idowngrade ang modem, at since downgraded na nga kaya sya na naman ngayon ang sinubukan ko, at eto na naman,
Binalikan ko si Z3X.
eto po ang huling logs ng Z3X,
<aside>
haaiisstt... sa wakas natapos din sa tsamba, kaya sana ay makatulong ng kaunti.
Aral na nakuha: " Parang maganda na magkalapit ang released oh patch date nila"
History:
Dumating po sa akin na may pattern lock ang phone at PUK ang sim card (may ikinuwento si customer sa akin na di ko pwedeng ishare sa inyo, kaya humantong sa PUK ang sim card). Sabi ko sa kanya na di ko magagawa ang kanyang sim card problem kung wala na ang sim-bed. Ukol naman sa pattern locked ay di ko rin magagawa ng basta na lang dahil ng suriin ko ay naka FRP lock ang phone. Sabi ko sa kanya na pwedeng ireset ang phone basta't meron syang gmail account na nakalink sa kanyand device. Umalis po sya ng walang paalam, at yun na nga.
dito ko nalaman na naka on ang FRP ng phone,
Pagbalik nya:
Status: Stuck on activation...
Problema nya ngayon: Stuck on activation na sya.
Mga hakbangin:
Sinubukan ko munang gamitin sa octopus box, subalit ayaw ma reset ang FRP locking ng phone, kasunod ang Z3X box subalit may error pa rin. Hindi ko ginamit ang Real term at iba pang bypass ng FRP sa kadahilanang gusto kong masubukan ang galing ng dalawang boxes.
Since ayaw talagang mareset, ang hint, kailangan ko ng combination files (pinaalam ko muna sa kanya ang mga posibleng mangyayari at sumang ayon naman sya dahil saan saan na raw nya dinala ang phone at di nagawa.
Sinuri ko ang mga combination files sa support ng bawat boxes at ang Z3X lang ang may pinakamababang file size for download, kaya una kong ginamit ang Z3X.
<aside> </aside>
screenshot done,
at nang sinubukan ko, nakapasok na po sya sa menu.
di pa natapos ang problema dahil after resetting ng FRP locking,
buti na lang naisipan kong i-factory reset ang phone at naawang bumalik ang baseband,
Note: Nasa september 1, 2016 ang patch date ng firmware, at kadalasan pag nasa mga ganitong release date na masyadong bago pa ay mahirap maiunlock ang telepono gamit ang ating mga boxes. Subalit sinubukan ko pa rin at baka sakali,
sample tests,
Z3x,
Octopus (di ko nakunan ng screen shot pero pareho lang din na may error, sa read code ay failed sa direct unlock ay ayaw din kasi kailangan pa ng root permission), Kaya sinubukan kong maghanap ng root file, sa kadahilanang wala akong makita kaya naisipan ko na naman ang free account ng chimera upang mairoot ang phone at eto na nga,
at after rooting,
Buti na lang at nagkataong meron akong available na nadownload mula sa support ng Octopus box na mababa sa september at nasa july, bale magkasunod lang na build. Kaya sinubukan kong ipasok ang firmware gamit ang Octopus box.
Logs ng flashing,
<aside>
Welcome to Octoplus/Octopus Box Samsung software version 2.4.6
-----------------------------------------------------------------------------------
To connect SCL24 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-J710GN phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: J710GNDXU1APG1_J710GNOLB1APG1
_XME_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Writing firmware Canceled
Performed by 2.4.6 Software version.
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Click to expand...
</aside> -----------------------------------------------------------------------------------
To connect SCL24 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-J710GN phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: J710GNDXU1APG1_J710GNOLB1APG1
_XME_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Writing firmware Canceled
Performed by 2.4.6 Software version.
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Click to expand...
Tried unlock ulit via Octopus,
<aside>
Platform: Samsung Android
Selected port: COM11
Selected model: SM-J710GN
Searching for a phone. Please wait...
Found phone on COM11
Reading info...
Detected phone model: SM-J710GN
HW Version: SM-J710GZDUGLB
PDA version: J710GNDXU1APG1
CSC version: J710GNOLB1APG1
CP version: J710GNDXU1APG1
Phone SN: RF8H83ADQPX
Phone IMEI: 358447-07-396288-9
Reading HWID...OK
Reading NV data...OK
Read codes failed
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM11
Selected model: SM-J710GN
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-J710GN
Firmware compiled date: Tue Jul 5 00:09:26 KST 2016
PDA version: J710GNDXU1APG1
CSC version: J710GNOLB1APG1
SW version: J710GNDXU1APG1
Phone SN: RF8H83ADQPX
Android version: 6.0.1 (MMB29K)
Sales code: GLB
Country: PHILIPPINES
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2016-07-01
Codename: j7xeltedx
Checking Root:
Phone is not Rooted.
Phone unlocking failed
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Click to expand...
</aside> Selected port: COM11
Selected model: SM-J710GN
Searching for a phone. Please wait...
Found phone on COM11
Reading info...
Detected phone model: SM-J710GN
HW Version: SM-J710GZDUGLB
PDA version: J710GNDXU1APG1
CSC version: J710GNOLB1APG1
CP version: J710GNDXU1APG1
Phone SN: RF8H83ADQPX
Phone IMEI: 358447-07-396288-9
Reading HWID...OK
Reading NV data...OK
Read codes failed
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM11
Selected model: SM-J710GN
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-J710GN
Firmware compiled date: Tue Jul 5 00:09:26 KST 2016
PDA version: J710GNDXU1APG1
CSC version: J710GNOLB1APG1
SW version: J710GNDXU1APG1
Phone SN: RF8H83ADQPX
Android version: 6.0.1 (MMB29K)
Sales code: GLB
Country: PHILIPPINES
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2016-07-01
Codename: j7xeltedx
Checking Root:
Phone is not Rooted.
Phone unlocking failed
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Click to expand...
Naku read code at direct unlock ayaw kahit ang security patch level nya ay nasa 2016-07-01 na... at phone is not rooted na naman daw, naisipan kong di bale na, since dating may sabi si Z3X na kailangang idowngrade ang modem, at since downgraded na nga kaya sya na naman ngayon ang sinubukan ko, at eto na naman,
Binalikan ko si Z3X.
eto po ang huling logs ng Z3X,
<aside>
Operation: Read Codes
Selected model: SM-J710GN
Software version: 27.2
Searching Samsung modem... detected COM11
Reading phone info... Ok
Model: SM-J710GN
AP version: J710GNDXU1APG1
CSC version: J710GNOLB1APG1
CP version: J710GNDXU1APG1
Product code: SM-J710GZDUGLB
Phone SN: RF8H83ADQPX
Unique number: CAJ03A7D8EEBC83
Reading IMEI... Ok
IMEI: 358447073962889 (SIGN: OK)
IMEI 2: 358448073962887 (SIGN: OK)
Please wait, generating hash codes file, this can take few minutes... Ok
Reading data from phone... Ok
Modem board: SHANNON315
Checking NV data... Ok
Calculating... Ok
HWID: F7 02 00 00 00 00 00 00 00 00 00 00 C8 2D AE C2
Please wait, calculating codes... OK (time - 00:00:06)
Freeze code: 38042627
NET lock: 84292728
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.27.2
Click to expand...
</aside> Selected model: SM-J710GN
Software version: 27.2
Searching Samsung modem... detected COM11
Reading phone info... Ok
Model: SM-J710GN
AP version: J710GNDXU1APG1
CSC version: J710GNOLB1APG1
CP version: J710GNDXU1APG1
Product code: SM-J710GZDUGLB
Phone SN: RF8H83ADQPX
Unique number: CAJ03A7D8EEBC83
Reading IMEI... Ok
IMEI: 358447073962889 (SIGN: OK)
IMEI 2: 358448073962887 (SIGN: OK)
Please wait, generating hash codes file, this can take few minutes... Ok
Reading data from phone... Ok
Modem board: SHANNON315
Checking NV data... Ok
Calculating... Ok
HWID: F7 02 00 00 00 00 00 00 00 00 00 00 C8 2D AE C2
Please wait, calculating codes... OK (time - 00:00:06)
Freeze code: 38042627
NET lock: 84292728
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.27.2
Click to expand...
haaiisstt... sa wakas natapos din sa tsamba, kaya sana ay makatulong ng kaunti.
Aral na nakuha: " Parang maganda na magkalapit ang released oh patch date nila"
