- Joined
- May 6, 2016
- Messages
- 94
- Reaction score
- 0
- Points
- 1
Unlock FRP via Z3x Pro with UART Cable
(Sorry I Don't Have Any Photos Because I Don't Know How To Upload...hehe
but I Will Give The Complete Instruction.)
First Of All,Get Your Pen And Paper and Copy The Android Version and The Build Number from Recovery Mode (In Case Of Boot/Program Problem After The Bypass).
Second,Ready Your UART Cable,Open Z3x Pro,Select G935F..Then,Select Z3X BOX Serial Port(COM Port),And Click Reset FRP UFS.
NOTE:You Must Power Off The Phone
Third,Hold Volume Down Together With Power Botton And Connect Immediately The UART Cable To The Phone.
Last,Wait For It..After That,The Phone Will Restart and Set Your Phone With No Connect To Wifi and Block By Google Account...
NOTE
LEASE FOLLOW EVERY STEPS UNTIL END TO BYPASS FRP 
=))
GOOD LUCK
(Sorry I Don't Have Any Photos Because I Don't Know How To Upload...hehe
but I Will Give The Complete Instruction.)
First Of All,Get Your Pen And Paper and Copy The Android Version and The Build Number from Recovery Mode (In Case Of Boot/Program Problem After The Bypass).
Second,Ready Your UART Cable,Open Z3x Pro,Select G935F..Then,Select Z3X BOX Serial Port(COM Port),And Click Reset FRP UFS.
NOTE:You Must Power Off The Phone
Third,Hold Volume Down Together With Power Botton And Connect Immediately The UART Cable To The Phone.
Last,Wait For It..After That,The Phone Will Restart and Set Your Phone With No Connect To Wifi and Block By Google Account...
NOTE
LEASE FOLLOW EVERY STEPS UNTIL END TO BYPASS FRP =))GOOD LUCK